Details
-
Type: extRequest
-
Status: Closed
-
Priority: Major
-
Resolution: Done
-
Fix Version/s: 2021
-
Component/s: FIWARE-TECH-HELP
-
Labels:None
-
Sender Email:
-
HD-Chapter:IoT
-
HD-Enabler:IDAS
Description
Dear IDAS team, Carlos,
after the disk failure on our server, we repaired, re-installed, and
re-started the application that uses the IDAS instance on the
130.206.80.47:8002 (Idas FINESCE)
IDASClient c = new
IDASClient("http://130.206.80.47:8002/idas/sml?apikey=69ra4ia6acvgm6f5p7nn19
crdi");
We cross-checked the network settings and the communication channel is open,
not restricted.
The issue is the fact that the IDAS refuse the connection by returning the
"407 Proxy Authentication required".
We do not have any proxy. Our software worked in the past. There seems no
reasons for the different behavior.
We tried to ping http://130.206.80.47, but IDAS is not answering.
We tried to post some data through POSTMAN, but the answer is "404 Not
Found".
The urgency is caused by the 15th September Final review of FIENSCE with EC
officials, so the application should be working.
Please, could you check and reactivate the IDAS instance that serves FINESCE
application as soon as possible in the same configuration as before.
Thank you. M. SImonov
_______________________________________________
Fiware-lab-help mailing list
Fiware-lab-help@lists.fiware.org
https://lists.fiware.org/listinfo/fiware-lab-help-new
[Created via e-mail received from: "M. Simonov, PhD (ISMB)" <simonov@ismb.it>]
Activity
Ok thanks, I’ve assigned the ticket to the second level support for IDAS GE.
Daniele
On 09 Sep 2015, at 10:29, M. Simonov, PhD (ISMB) <simonov@ismb.it> wrote:
Hi Daniele,
IDAS comes from Telefonica.
We are users only. We used the FIWARE IDAS instance based on the instructions and the apikey from the IDAS team.
It was working till 31 May.
Regards, Mikhail
----Original Message----
From: Daniele Santoro daniele.santoro@create-net.org
Sent: mercoledì 9 settembre 2015 10:09
To: simonov@ismb.it
Cc: e.idas1; CARLOS RALLI UCENDO; marco.paulucci; fiware-lab-help; gianluca.zanetto@teamware.it; Massimiliano Nigrelli; Federico Rizzo; Pasquale Andriani; alessandro.gobbo
Subject: Re: [Fiware-lab-help] URGENT: request for assistance; IDAS FINESCE dedicated instance
Dear,
In which region are the instance running ? I can forward the issue to the specific region support to give you an more specific help.
Best,
Daniele
Dear Carlos, all,
as suggested by Pasquale I would express our common view by asking you to
keep active the IDAS with the SensorML until the end of the 2015.
It seems that after the end of the project the FINESCE experimental facility
will be down in a reasonable time, e.g. by December 31st.
In FINESCE we created and deployed the “ETSI M2M compliant” software
solution based on the IDAS/SensorML features prospected by the FI-WARE
catalogue.
In the metering scenario depicted by the most recent EU directive, the
“UltraLight 2.0” is not mentioned as a metering protocol.
Because of the above, there are no reasons for us to upgrade to the UL2.0:
the DSOs could demand for the ETSI M2M/SensorML but they unlikely will
demand for the UL2.0.
By the way, the co-funding rate in FP7 was 75% (e.g. lower than 100%): we
made an investment.
Based on the articles from the EC contract, we should preserve our working
baseline.
Should you dismiss the IDAS 1.0 (SensorML) by December 31st, we would
appreciate to get/download its source code, the ready-made binaries, and the
current configuration in full in order to be able to replicate the fully
working environment on our servers.
Thank you for understanding. Yours, Mikhail Simonov