Dear Jesús,

You can download the GE implementations and install them locally. It is not mandatory but I would say that the best way of proceeding is using FIWARE Lab. Why? Simple, we have self deployment facilities and they will save a lot of trouble. Not for all Ges, but for many of them. For instance, you can deploy Orion with a few clicks. The alternative is downloading the GE implementations and following the installation guides, which always takes time.

Using FIWARE Lab you will not need to use your local computing resources either, which is always nice.

This is a very large scale project so there is are massive amounts of information in many places. We 've made an effort to create a repository that concentrates all the relevant pointers for each GEi. This is the catalogue (http://catalogue.fi-ware.org/enablers/). My advice would always be go there and see what we can offer for each GE. Each enabler has an installation/admin manual and a user manual, the user manual is normally short and straight to the point. Each GE has associated Open Specs that should be referred form the "Overview" tab of the respective catalogue entry.

Additionally, we have an eLearning environment called FIWARE Academy (edu.fi-ware.org/) that depending on what you want to do maybe of great help.

I hope that this is of help.

Best regards,

Miguel

El 19/11/2014 11:31, Jesus martinez escribió:
Dear all, good morning

This is the first time that I develop an application with FiWare and I
don't know how to start. I'm going to use Identity Manager, Orion Context
Broker and Complex Event Manager enablers.

Where I need to install the enablers? Is it necessary to user Fi-Lab and
the Virtual Machine to develop my application? Is there a little guide to
start with Fi-Ware generic enablers??

Thank in advance for your support

–

Jesús Martinez
ICT
PYRO FIRE EXTINCTION,S.L.
Centro de Desarrollo Empresarial - Edificio 9B
Universitat Politècnica de València
Camino de Vera s/n - 46022 Valencia - (Valencia) - SPAIN
(Email) jesus.martinez@pyro.es<joselizgrana@pyro.es>
www.pyro.es<http://www.pyro.es/>

[cid:part3.03010902.00060102@telefonica.com]
Este mensaje puede contener información privilegiada/confidencial. Su contenido es para uso exclusivo de sus destinatarios, po lo que queda prohibida la difusión, copia o utilización de dicha información por terceros. Si usted no es la persona a la que se dirige el mensaje (ni tampoco responsable para entregárselo a dicha persona), le comunicamos que la distribución, copia o utilización de este mensaje, o de cualquier documento adjunto al mismo, cualquiera que fuera su finalidad, están prohibidas por la ley. En caso de haber recibido este mensaje por error, le rogamos que, de forma inmediata, nos lo comunique mediante correo electrónico remitido a nuestra atención a info@pyro.es<info@pyro.es> y proceda a su eliminación, así como a la de cualquier documento adjunto al mismo.
Gracias por su colaboración.

Privileged/Confidential Information may be contained in this message. Therefore any disclosure, copying or use by third parties of this information is prohibited. If you are not the address indicated in this message, you are hereby notified that any dissemination, distribution, copying or use of this message or any attachments, for any purpose, is strictly prohibited by law. If you are not the address indicated in this message, you should immediately delete it and any attachments and notify the sender by reply e-mail to info@pyro.es<info@pyro.es>.
Thank you for your co-operation.

Dear Miguel, dear all

thank you very much for your response.

I'm trying to work with a Virtual Machine from Fiware Labs. I'm taking into
account the advices from StackOverflow
http://stackoverflow.com/questions/26928549/use-an-instance-of-orion-context-broker-fiware
and
http://stackoverflow.com/questions/26928341/installing-context-broker-ge-in-fiware

But when I try to connect with my VM with SSH, I can't. I have a
certificate (generate by Fi Labs, of course) and I associate a IP to my VM

Attached you'll find a screenshot of my VM Instance

How I can access to my VM from my local computer? Do I need a public IP? In
this case, how I get this public IP?

Best regards and excuse me for ask a lot

2014-11-19 14:11 GMT+01:00 MIGUEL CARRILLO PACHECO <

–

Jesús Martinez
ICT
PYRO FIRE EXTINCTION,S.L.
Centro de Desarrollo Empresarial - Edificio 9B
Universitat Politècnica de València
Camino de Vera s/n - 46022 Valencia - (Valencia) - SPAIN
(Email) jesus.martinez@pyro.es <joselizgrana@pyro.es>
www.pyro.es

Este mensaje puede contener información privilegiada/confidencial. Su
contenido es para uso exclusivo de sus destinatarios, po lo que queda
prohibida la difusión, copia o utilización de dicha información por terceros.
Si usted no es la persona a la que se dirige el mensaje (ni tampoco
responsable para entregárselo a dicha persona), le comunicamos que la
distribución, copia o utilización de este mensaje, o de cualquier documento
adjunto al mismo, cualquiera que fuera su finalidad, están prohibidas por la
ley. En caso de haber recibido este mensaje por error, le rogamos que, de
forma inmediata, nos lo comunique mediante correo electrónico remitido a
nuestra atención a info@pyro.es y proceda a su eliminación, así como a la
de cualquier documento adjunto al mismo.
Gracias por su colaboración.

Privileged/Confidential Information may be contained in this message.
Therefore any disclosure, copying or use by third parties of this
information is prohibited. If you are not the address indicated in this
message, you are hereby notified that any dissemination, distribution,
copying or use of this message or any attachments, for any purpose, is
strictly prohibited by law. If you are not the address indicated in this
message, you should immediately delete it and any attachments and notify
the sender by reply e-mail to info@pyro.es.
Thank you for your co-operation.

_______________________________________________
Fiware-lab-help mailing list
Fiware-lab-help@lists.fi-ware.org
https://lists.fi-ware.org/listinfo/fiware-lab-help

Dear Jesús,

Please log in on FIWARE Lab, go to "Help & Info". You'll see that there are several embedded videos. Choose "Cloud" and then "instances". Watch this video and see if this resolves you doubts. It takes just 6 minutes to watch.

I hope that this clarifies !

Best regards,

Miguel

El 19/11/2014 16:04, Jesus martinez escribió:
Dear Miguel, dear all

thank you very much for your response.

I'm trying to work with a Virtual Machine from Fiware Labs. I'm taking into account the advices from StackOverflow
http://stackoverflow.com/questions/26928549/use-an-instance-of-orion-context-broker-fiware and
http://stackoverflow.com/questions/26928341/installing-context-broker-ge-in-fiware

But when I try to connect with my VM with SSH, I can't. I have a certificate (generate by Fi Labs, of course) and I associate a IP to my VM

Attached you'll find a screenshot of my VM Instance

How I can access to my VM from my local computer? Do I need a public IP? In this case, how I get this public IP?

Best regards and excuse me for ask a lot

2014-11-19 14:11 GMT+01:00 MIGUEL CARRILLO PACHECO <miguel.carrillopacheco@telefonica.com<miguel.carrillopacheco@telefonica.com>>:
Dear Jesús,

You can download the GE implementations and install them locally. It is not mandatory but I would say that the best way of proceeding is using FIWARE Lab. Why? Simple, we have self deployment facilities and they will save a lot of trouble. Not for all Ges, but for many of them. For instance, you can deploy Orion with a few clicks. The alternative is downloading the GE implementations and following the installation guides, which always takes time.

Using FIWARE Lab you will not need to use your local computing resources either, which is always nice.

This is a very large scale project so there is are massive amounts of information in many places. We 've made an effort to create a repository that concentrates all the relevant pointers for each GEi. This is the catalogue (http://catalogue.fi-ware.org/enablers/). My advice would always be go there and see what we can offer for each GE. Each enabler has an installation/admin manual and a user manual, the user manual is normally short and straight to the point. Each GE has associated Open Specs that should be referred form the "Overview" tab of the respective catalogue entry.

Additionally, we have an eLearning environment called FIWARE Academy (edu.fi-ware.org/<http://edu.fi-ware.org/>) that depending on what you want to do maybe of great help.

I hope that this is of help.

Best regards,

Miguel

El 19/11/2014 11:31, Jesus martinez escribió:
Dear all, good morning

This is the first time that I develop an application with FiWare and I
don't know how to start. I'm going to use Identity Manager, Orion Context
Broker and Complex Event Manager enablers.

Where I need to install the enablers? Is it necessary to user Fi-Lab and
the Virtual Machine to develop my application? Is there a little guide to
start with Fi-Ware generic enablers??

Thank in advance for your support

–

Jesús Martinez
ICT
PYRO FIRE EXTINCTION,S.L.
Centro de Desarrollo Empresarial - Edificio 9B
Universitat Politècnica de València
Camino de Vera s/n - 46022 Valencia - (Valencia) - SPAIN
(Email) jesus.martinez@pyro.es<joselizgrana@pyro.es>
www.pyro.es<http://www.pyro.es/>

[cid:part8.01020503.05080908@telefonica.com]
Este mensaje puede contener información privilegiada/confidencial. Su contenido es para uso exclusivo de sus destinatarios, po lo que queda prohibida la difusión, copia o utilización de dicha información por terceros. Si usted no es la persona a la que se dirige el mensaje (ni tampoco responsable para entregárselo a dicha persona), le comunicamos que la distribución, copia o utilización de este mensaje, o de cualquier documento adjunto al mismo, cualquiera que fuera su finalidad, están prohibidas por la ley. En caso de haber recibido este mensaje por error, le rogamos que, de forma inmediata, nos lo comunique mediante correo electrónico remitido a nuestra atención a info@pyro.es<info@pyro.es> y proceda a su eliminación, así como a la de cualquier documento adjunto al mismo.
Gracias por su colaboración.

Privileged/Confidential Information may be contained in this message. Therefore any disclosure, copying or use by third parties of this information is prohibited. If you are not the address indicated in this message, you are hereby notified that any dissemination, distribution, copying or use of this message or any attachments, for any purpose, is strictly prohibited by law. If you are not the address indicated in this message, you should immediately delete it and any attachments and notify the sender by reply e-mail to info@pyro.es<info@pyro.es>.
Thank you for your co-operation.

El correo de esta persona es jesus.martinez@pyro.es