Uploaded image for project: 'Help-Desk'
  1. Help-Desk
  2. HELP-4718

FIWARE.Request.Tech.Apps.ApplicationMashup.WirecloudDeployment

        Details

        • Type: extRequest
        • Status: Closed
        • Priority: Blocker
        • Resolution: Done
        • Fix Version/s: 2021
        • Component/s: FIWARE-TECH-HELP
        • Labels:
          None

          Description

          Hi Genci,

          1
          I've repeated with success a similar test: didn't include StreamOriented
          4.4.2 in the Tier since it isn't in my Software catalog.
          Now, I was also able to delete Tiers from another Blueprint Template: in
          the past I wasn't able to delete them.

          2
          By the way, what is the normal way of adding GEs to the Software catalog
          available when defining Tiers?
          Yesterday, I was navigating in the documentatiion of the Wirecloud GE
          and stepped into this page: http://conwet.fi.upm.es/wirecloud/tryit
          I tried it: clicked on the link "Register you account into
          http://mashup.lab.fiware.org and get access to the FIWARE Lab instance
          of WireCloud"
          If I'm not wrong, a result was to add a recent version of Wirecloud to
          "Software in Catalogue". But this happened by chance!
          Or, possibly, instead I was only enabled to use a global instance of
          Wirecloud available in the Trento node.
          I only know, from an answer of our coach, that installing Wirecloud with
          the command line "pip install wirecloud" (it is a Python application),
          or downloading it from GitHub and following the installation procedure,
          would not be the same.
          For the rest, I am still very confused.

          3.
          Keeping to the case of Wirecloud, possibly we could use a global
          instance of this GE to start developing our mashups.
          But it isn't only a development tool: it includes also runtime code.
          So, at some point we should create a dedicated instance of it in a VM,
          to be able to deploy our application. Am I correct?

          Thank you, Giovanni

          Il 15/09/2015 20.08, Genci Tallabaci ha scritto:
          > Hi all,
          >
          > I have just tried creating a blueprint template, and then launch an instance of this template.
          > In the template I just added in the Tier the following software:
          > *StreamOriented 4.4.2
          > *cep 3.2.0
          >
          > The deploy terminated with success ( attached the screenshots of the result ).
          >
          > Can you please try and provide us feedback,
          >
          >
          > Regards
          > Genci
          >
          > –
          >
          > Genci Tallabaci
          > TRENTINO NETWORK S.R.L.
          > Via G.Pedrotti, 18 - 38121 - TRENTO
          > Tel (+39) 0461.020200
          > Fax (+39) 0461.020201

          –
          Giovanni Toffoli, CEO
          LINK srl - Via Udine 30, 00161 Roma
          +39 06 44231115, +39 340 0727780

          _______________________________________________
          Fiware-fiadopt-coaching mailing list
          Fiware-fiadopt-coaching@lists.fiware.org
          https://lists.fiware.org/listinfo/fiware-fiadopt-coaching-new

          [Created via e-mail received from: Giovanni Toffoli - LINK <toffoli@linkroma.it>]

            Issue Links

            relates to

            extRequest - Request from external stakeholder received in the help desk HELC-1036 FIWARE.Request.Coach.FI-ADOPT.Re: Blueprint Deploy

            • Major - Major loss of function.
            • Closed

              Activity

              Ascending order - Click to sort in descending order
              4 older comments
              Hide
              Permalink
              ichulani ilknur chulani added a comment -

              Dear Alvaro,

              Could you kindly provide assistance for Giovanni's further questions?

              Thanks..

              ilknur

              Show
              ichulani ilknur chulani added a comment - Dear Alvaro, Could you kindly provide assistance for Giovanni's further questions? Thanks.. ilknur
              Hide
              Permalink
              aarranz Álvaro Arranz added a comment -

              Dear Giovanni,

              first, sorry for the delay on the response,

              after wiring the widgets and the connectors, I can see no marks on the
              Santander map, in the Map Viewer, and a waiting icon appears on the
              Linear Graph widget; I presume that the NGSI source mentioned in the
              example, which I downloaded together with the other operators, refers a
              POI source currently not available; or am I wrong?

              The POI source exists, but we have found a problem in the documentation, we are working on fixing it (New documentation is going to be deployed on Read the Docs ). In the mean time, there is a missing step, you have to edit the NGSI Entity 2 POI settings and change the Coordinates attribute from the current value: position to the correct value for the example: Latitud, Longitud.

              when I reload my workspace, I see a white "1" on a red elliptic icon
              above the Wiring tab; what information does it convey?

              That means that WireCloud has detected an error in the wiring module, you have to enter into the Wiring Editor view and check what happened. Inside the Wiring Editor view you should see something similar to this:

              You can get more details by clicking on the "1 error" label.

              Soon, we will start to develop our own data providers, widgets and
              connectors; if we will meet any problems, we will take advantage again
              of your kindness.

              You are welcome

              Once again, sorry for the inconvenience.
              Best regards,
              Álvaro

              Show
              aarranz Álvaro Arranz added a comment - Dear Giovanni, first, sorry for the delay on the response, after wiring the widgets and the connectors, I can see no marks on the Santander map, in the Map Viewer, and a waiting icon appears on the Linear Graph widget; I presume that the NGSI source mentioned in the example, which I downloaded together with the other operators, refers a POI source currently not available; or am I wrong? The POI source exists, but we have found a problem in the documentation, we are working on fixing it (New documentation is going to be deployed on Read the Docs ). In the mean time, there is a missing step, you have to edit the NGSI Entity 2 POI settings and change the Coordinates attribute from the current value: position to the correct value for the example: Latitud, Longitud . when I reload my workspace, I see a white "1" on a red elliptic icon above the Wiring tab; what information does it convey? That means that WireCloud has detected an error in the wiring module, you have to enter into the Wiring Editor view and check what happened. Inside the Wiring Editor view you should see something similar to this: You can get more details by clicking on the "1 error" label. Soon, we will start to develop our own data providers, widgets and connectors; if we will meet any problems, we will take advantage again of your kindness. You are welcome Once again, sorry for the inconvenience. Best regards, Álvaro
              Hide
              Permalink
              ichulani ilknur chulani added a comment -

              Dear Giovanni,

              Has Alvaro's guidance helped you solve the issue? Can we close this ticket?

              Best regards,

              ilknur

              Show
              ichulani ilknur chulani added a comment - Dear Giovanni, Has Alvaro's guidance helped you solve the issue? Can we close this ticket? Best regards, ilknur
              Hide
              Permalink
              fw.ext.user FW External User added a comment -

              Dear Ilknur,
              yes, you can close the issue.
              I remind that I noticed the status "ANSWERED".
              Possibly I didn't notice that it was also labelled as "Unresolved". Sorry.
              Many thanks to you and to Alvaro.
              Best regards, Giovanni

              –
              Giovanni Toffoli, CEO
              LINK srl - Via Udine 30, 00161 Roma
              +39 06 44231115, +39 340 0727780

              Show
              fw.ext.user FW External User added a comment - Dear Ilknur, yes, you can close the issue. I remind that I noticed the status "ANSWERED". Possibly I didn't notice that it was also labelled as "Unresolved". Sorry. Many thanks to you and to Alvaro. Best regards, Giovanni – Giovanni Toffoli, CEO LINK srl - Via Udine 30, 00161 Roma +39 06 44231115, +39 340 0727780
              Hide
              Permalink
              ichulani ilknur chulani added a comment -

              no problem Giovanni, and thank you very much Alvaro for your help

              Show
              ichulani ilknur chulani added a comment - no problem Giovanni, and thank you very much Alvaro for your help

                People

                • Assignee:
                  aarranz Álvaro Arranz
                  Reporter:
                  fw.ext.user FW External User
                • Votes:
                  0 Vote for this issue
                  Watchers:
                  4 Start watching this issue

                  Dates

                  • Created:
                    Updated:
                    Resolved: