[HELP-117] FIWARE.Request.General.FIWARE.Request.Lab.Fwd: RE: Contact form - JIRA

FIWARE-LAB-HELP created issue - 24/Sep/14 2:34 PM

Hide

Permalink

FIWARE-LAB-HELP added a comment - 24/Sep/14 2:34 PM

Dear Miguel, Rob,

I am fairly new to using blueprints.

Could you please verify if it is an issue of the node or if it is more general (e.g. applies to any node).

The screenshots show a mix of Berlin and Prague node.
So I assume that the issue is probably not limited to the Berlin node.

Best Regards, Bernd

============
Bernd Bochow
Next Generation Network Infrastructures
Fraunhofer Institute for Open Communication Systems (FOKUS)
Kaiserin-Augusta-Allee 31, D-10589 Berlin
e-mail: bernd.bochow@fokus.fraunhofer.de<bernd.bochow@fokus.fraunhofer.de>, bernd.bochow@ieee.org<bernd.bochow@ieee.org>
phone: +49 30 3463-7238
fax: +49 30 3463-997238

On 2 Jul 2014, at 12:10, Miguel Carrillo wrote:

Hi

Rob (in CC) is asking for support with blueprint templates. He's getting an error.

Please see the captures and also his original email to the feedback list at the bottom.

Best regards,

Miguel
-------- Mensaje original --------
Asunto: RE: [Fiware-feedback] [FI-WARE] Contact form
Fecha: Wed, 2 Jul 2014 09:53:05 +0000
De: Rob Manders <Rob.Manders@Q-ray.nl><Rob.Manders@Q-ray.nl>
Para: Miguel Carrillo <mcp@tid.es><mcp@tid.es>

Hello Miquel

It is in the fi-lab. Environment Berlin. I was pointed to this request form by fi-space (issue in bitbucket).
You can find it here:
https://bitbucket.org/fispace/apps/issue/49/open-call-unable-to-create-tier-in

To be sure I attach the screenshots to this mail.

Met vriendelijke groet,

Rob Manders
Senior Consultant

Q-ray BV
Food, Feed & Flowers
Agro Business Park 9 | Postbus 279 | 6700 AG Wageningen
+31 317 471 371 (algemeen) | +31 317 471 369 (doorkiesnummer) | +31 6 26 23 41 40 (mobiel)

www.Q-ray.nl<http://www.Q-ray.nl/> | E: rob.manders@q-ray.nl<rob.manders@q-ray.nl> | KvK Centraal Gelderland: 09.133.924
Alles over onze mobiele oplossingen vindt u op AppsInBusiness.nl<http://AppsInBusiness.nl>

Dit bericht met eventuele bijlagen is vertrouwelijk en uitsluitend bestemd voor (rechts)persoon aan welke het is gericht. Als dit bericht niet voor u bestemd is, verzoeken wij u het bericht en eventuele bijlagen te verwijderen en contact op te nemen met de afzender. Hoewel afzender maatregelen heeft genomen om virussen in dit bericht en eventuele bijlagen te voorkomen, dient u ook zelf na te gaan of virussen aanwezig zijn aangezien afzender niet aansprakelijk is voor computervirussen die veroorzaakt zijn door dit bericht. Q-ray b.v. accepteert geen verantwoordelijkheid of aansprakelijkheid voor schade die voortvloeit uit de inhoud en/of de verzending van dit bericht.

----~~Oorspronkelijk bericht~~----
Van: Miguel Carrillo mcp@tid.es
Verzonden: woensdag 2 juli 2014 11:30
Aan: Rob Manders; fiware-feedback@lists.fi-ware.eu<fiware-feedback@lists.fi-ware.eu>
Onderwerp: Re: [Fiware-feedback] [FI-WARE] Contact form

Dear Rob,

Can you please identify the environment where you experienced this (FI-LAb or the Testbed)? Let me know and I will be happy to forward your request to the corresponding support list.

Tip: when you need support I would advise to go to the support channel directly (it will save you time and steps). You get a "Need help?" link in the home page of both environments.

Best regards,

Miguel
El 02/07/2014 10:28, FI-WARE escribió:
> Rob Manders wrote:
>
> Hello
> I am not able to create tiers in the blueprint. I get error 500:
>
> Error creating tier Tomcat6. Cause: 500 Error
>
> {"errors": [

{"message":"Internal PaasManager Server error# Could not > commit JPA transaction; nested exception is > javax.persistence.RollbackException: Transaction marked as > rollbackOnly", "code":500 }

] }
>
> I am also not able to clone from the catalog. After cloning the message is that the template clone is succesfull. It is however not shown in the list of templates.
> I created some screenshots to illustrate the steps but I can not upload them using this form.
>
> _______________________________________________
> Fiware-feedback mailing list
> Fiware-feedback@lists.fi-ware.org<Fiware-feedback@lists.fi-ware.org>
> https://lists.fi-ware.org/listinfo/fiware-feedback
> .
>

–
----------------------------------------------------------------------
/ _// Miguel Carrillo Pacheco
_/ _/ _/ _/ Telefónica Distrito Telefónica
/ _//_/ _/ _/ Investigación y Edifico Oeste 1, Planta 9
_/ _/ _/ _/ Desarrollo Ronda de la Comunicación S/N
/ _// 28050 Madrid (Spain)
Tel: (+34) 91 483 26 77

e-mail: mcp@tid.es<mcp@tid.es>

Follow FI-WARE on the net

Website: http://www.fi-ware.org<http://www.fi-ware.org/>
Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242
Twitter: http://twitter.com/Fiware
LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932
----------------------------------------------------------------------

________________________________

Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:
http://www.tid.es/ES/PAGINAS/disclaimer.aspx

________________________________

Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:
http://www.tid.es/ES/PAGINAS/disclaimer.aspx
<6.gif><5.gif><4.gif><3.gif><2.gif><1.gif>_______________________________________________
Fiware-lab-help mailing list
Fiware-lab-help@lists.fi-ware.org<Fiware-lab-help@lists.fi-ware.org>
https://lists.fi-ware.org/listinfo/fiware-lab-help

_______________________________________________
Fiware-lab-help mailing list
Fiware-lab-help@lists.fi-ware.org
https://lists.fi-ware.org/listinfo/fiware-lab-help

Show

FIWARE-LAB-HELP added a comment - 24/Sep/14 2:34 PM Dear Miguel, Rob, I am fairly new to using blueprints. Could you please verify if it is an issue of the node or if it is more general (e.g. applies to any node). The screenshots show a mix of Berlin and Prague node. So I assume that the issue is probably not limited to the Berlin node. Best Regards, Bernd ============ Bernd Bochow Next Generation Network Infrastructures Fraunhofer Institute for Open Communication Systems (FOKUS) Kaiserin-Augusta-Allee 31, D-10589 Berlin e-mail: bernd.bochow@fokus.fraunhofer.de< bernd.bochow@fokus.fraunhofer.de >, bernd.bochow@ieee.org< bernd.bochow@ieee.org > phone: +49 30 3463-7238 fax: +49 30 3463-997238 On 2 Jul 2014, at 12:10, Miguel Carrillo wrote: Hi Rob (in CC) is asking for support with blueprint templates. He's getting an error. Please see the captures and also his original email to the feedback list at the bottom. Best regards, Miguel -------- Mensaje original -------- Asunto: RE: [Fiware-feedback] [FI-WARE] Contact form Fecha: Wed, 2 Jul 2014 09:53:05 +0000 De: Rob Manders <Rob.Manders@Q-ray.nl>< Rob.Manders@Q-ray.nl > Para: Miguel Carrillo <mcp@tid.es>< mcp@tid.es > Hello Miquel It is in the fi-lab. Environment Berlin. I was pointed to this request form by fi-space (issue in bitbucket). You can find it here: https://bitbucket.org/fispace/apps/issue/49/open-call-unable-to-create-tier-in To be sure I attach the screenshots to this mail. Met vriendelijke groet, Rob Manders Senior Consultant Q-ray BV Food, Feed & Flowers Agro Business Park 9 | Postbus 279 | 6700 AG Wageningen +31 317 471 371 (algemeen) | +31 317 471 369 (doorkiesnummer) | +31 6 26 23 41 40 (mobiel) www.Q-ray.nl< http://www.Q-ray.nl/ > | E: rob.manders@q-ray.nl< rob.manders@q-ray.nl > | KvK Centraal Gelderland: 09.133.924 Alles over onze mobiele oplossingen vindt u op AppsInBusiness.nl< http://AppsInBusiness.nl > Dit bericht met eventuele bijlagen is vertrouwelijk en uitsluitend bestemd voor (rechts)persoon aan welke het is gericht. Als dit bericht niet voor u bestemd is, verzoeken wij u het bericht en eventuele bijlagen te verwijderen en contact op te nemen met de afzender. Hoewel afzender maatregelen heeft genomen om virussen in dit bericht en eventuele bijlagen te voorkomen, dient u ook zelf na te gaan of virussen aanwezig zijn aangezien afzender niet aansprakelijk is voor computervirussen die veroorzaakt zijn door dit bericht. Q-ray b.v. accepteert geen verantwoordelijkheid of aansprakelijkheid voor schade die voortvloeit uit de inhoud en/of de verzending van dit bericht. ---- Oorspronkelijk bericht ---- Van: Miguel Carrillo mcp@tid.es Verzonden: woensdag 2 juli 2014 11:30 Aan: Rob Manders; fiware-feedback@lists.fi-ware.eu< fiware-feedback@lists.fi-ware.eu > Onderwerp: Re: [Fiware-feedback] [FI-WARE] Contact form Dear Rob, Can you please identify the environment where you experienced this (FI-LAb or the Testbed)? Let me know and I will be happy to forward your request to the corresponding support list. Tip: when you need support I would advise to go to the support channel directly (it will save you time and steps). You get a "Need help?" link in the home page of both environments. Best regards, Miguel El 02/07/2014 10:28, FI-WARE escribió: > Rob Manders wrote: > > Hello > I am not able to create tiers in the blueprint. I get error 500: > > Error creating tier Tomcat6. Cause: 500 Error > > {"errors": [ {"message":"Internal PaasManager Server error# Could not > commit JPA transaction; nested exception is > javax.persistence.RollbackException: Transaction marked as > rollbackOnly", "code":500 } ] } > > I am also not able to clone from the catalog. After cloning the message is that the template clone is succesfull. It is however not shown in the list of templates. > I created some screenshots to illustrate the steps but I can not upload them using this form. > > _______________________________________________ > Fiware-feedback mailing list > Fiware-feedback@lists.fi-ware.org< Fiware-feedback@lists.fi-ware.org > > https://lists.fi-ware.org/listinfo/fiware-feedback > . > – ---------------------------------------------------------------------- / _/ / Miguel Carrillo Pacheco _/ _/ _/ _/ Telefónica Distrito Telefónica / _/ /_/ _/ _/ Investigación y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicación S/N / _/ / 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: mcp@tid.es< mcp@tid.es > Follow FI-WARE on the net Website: http://www.fi-ware.org < http://www.fi-ware.org/ > Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at: http://www.tid.es/ES/PAGINAS/disclaimer.aspx ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at: http://www.tid.es/ES/PAGINAS/disclaimer.aspx <6.gif><5.gif><4.gif><3.gif><2.gif><1.gif>_______________________________________________ Fiware-lab-help mailing list Fiware-lab-help@lists.fi-ware.org< Fiware-lab-help@lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-lab-help _______________________________________________ Fiware-lab-help mailing list Fiware-lab-help@lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-lab-help

Hide

Permalink

FIWARE-LAB-HELP added a comment - 24/Sep/14 2:34 PM

Hi

I will provide support to Rob regarding blueprints in a separated mail.
Regards,
Henar

De: fiware-lab-help-bounces@lists.fi-ware.org fiware-lab-help-bounces@lists.fi-ware.org En nombre de Miguel Carrillo
Enviado el: miércoles, 02 de julio de 2014 12:10
Para: Rob Manders; fiware-lab-help@lists.fi-ware.org >> "fiware-lab-help@lists.fi-ware.org"
Asunto: [Fiware-lab-help] Fwd: RE: [Fiware-feedback] [FI-WARE] Contact form

Hi

Rob (in CC) is asking for support with blueprint templates. He's getting an error.

Please see the captures and also his original email to the feedback list at the bottom.

Best regards,

Miguel
-------- Mensaje original --------
Asunto:

RE: [Fiware-feedback] [FI-WARE] Contact form

Fecha:

Wed, 2 Jul 2014 09:53:05 +0000

De:

Rob Manders <Rob.Manders@Q-ray.nl><Rob.Manders@Q-ray.nl>

Para:

Miguel Carrillo <mcp@tid.es><mcp@tid.es>

Hello Miquel

It is in the fi-lab. Environment Berlin. I was pointed to this request form by fi-space (issue in bitbucket).

You can find it here:

https://bitbucket.org/fispace/apps/issue/49/open-call-unable-to-create-tier-in

To be sure I attach the screenshots to this mail.

Met vriendelijke groet,

Rob Manders

Senior Consultant

Q-ray BV

Food, Feed & Flowers

Agro Business Park 9 | Postbus 279 | 6700 AG Wageningen

+31 317 471 371 (algemeen) | +31 317 471 369 (doorkiesnummer) | +31 6 26 23 41 40 (mobiel)

www.Q-ray.nl<http://www.Q-ray.nl> | E: rob.manders@q-ray.nl<rob.manders@q-ray.nl> | KvK Centraal Gelderland: 09.133.924

Alles over onze mobiele oplossingen vindt u op AppsInBusiness.nl

Dit bericht met eventuele bijlagen is vertrouwelijk en uitsluitend bestemd voor (rechts)persoon aan welke het is gericht. Als dit bericht niet voor u bestemd is, verzoeken wij u het bericht en eventuele bijlagen te verwijderen en contact op te nemen met de afzender. Hoewel afzender maatregelen heeft genomen om virussen in dit bericht en eventuele bijlagen te voorkomen, dient u ook zelf na te gaan of virussen aanwezig zijn aangezien afzender niet aansprakelijk is voor computervirussen die veroorzaakt zijn door dit bericht. Q-ray b.v. accepteert geen verantwoordelijkheid of aansprakelijkheid voor schade die voortvloeit uit de inhoud en/of de verzending van dit bericht.

----~~Oorspronkelijk bericht~~----

Van: Miguel Carrillo mcp@tid.es

Verzonden: woensdag 2 juli 2014 11:30

Aan: Rob Manders; fiware-feedback@lists.fi-ware.eu<fiware-feedback@lists.fi-ware.eu>

Onderwerp: Re: [Fiware-feedback] [FI-WARE] Contact form

Dear Rob,

Can you please identify the environment where you experienced this (FI-LAb or the Testbed)? Let me know and I will be happy to forward your request to the corresponding support list.

Tip: when you need support I would advise to go to the support channel directly (it will save you time and steps). You get a "Need help?" link in the home page of both environments.

Best regards,

Miguel

El 02/07/2014 10:28, FI-WARE escribió:

> Rob Manders wrote:

>

> Hello

> I am not able to create tiers in the blueprint. I get error 500:

>

> Error creating tier Tomcat6. Cause: 500 Error

>

> {"errors": [

{"message":"Internal PaasManager Server error# Could not > commit JPA transaction; nested exception is > javax.persistence.RollbackException: Transaction marked as > rollbackOnly", "code":500 }

] }

>

> I am also not able to clone from the catalog. After cloning the message is that the template clone is succesfull. It is however not shown in the list of templates.

> I created some screenshots to illustrate the steps but I can not upload them using this form.

>

> _______________________________________________

> Fiware-feedback mailing list

> Fiware-feedback@lists.fi-ware.org<Fiware-feedback@lists.fi-ware.org>

> https://lists.fi-ware.org/listinfo/fiware-feedback

> .

>

–

----------------------------------------------------------------------

/ _// Miguel Carrillo Pacheco

_/ _/ _/ _/ Telefónica Distrito Telefónica

/ _//_/ _/ _/ Investigación y Edifico Oeste 1, Planta 9

_/ _/ _/ _/ Desarrollo Ronda de la Comunicación S/N

/ _// 28050 Madrid (Spain)

Tel: (+34) 91 483 26 77

e-mail: mcp@tid.es<mcp@tid.es>

Follow FI-WARE on the net

Website: http://www.fi-ware.org

Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242

Twitter: http://twitter.com/Fiware

LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932

----------------------------------------------------------------------

________________________________

Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.

This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:

http://www.tid.es/ES/PAGINAS/disclaimer.aspx

________________________________

Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:
http://www.tid.es/ES/PAGINAS/disclaimer.aspx

________________________________

Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:
http://www.tid.es/ES/PAGINAS/disclaimer.aspx

_______________________________________________
Fiware-lab-help mailing list
Fiware-lab-help@lists.fi-ware.org
https://lists.fi-ware.org/listinfo/fiware-lab-help

Show

FIWARE-LAB-HELP added a comment - 24/Sep/14 2:34 PM Hi I will provide support to Rob regarding blueprints in a separated mail. Regards, Henar De: fiware-lab-help-bounces@lists.fi-ware.org fiware-lab-help-bounces@lists.fi-ware.org En nombre de Miguel Carrillo Enviado el: miércoles, 02 de julio de 2014 12:10 Para: Rob Manders; fiware-lab-help@lists.fi-ware.org >> "fiware-lab-help@lists.fi-ware.org" Asunto: [Fiware-lab-help] Fwd: RE: [Fiware-feedback] [FI-WARE] Contact form Hi Rob (in CC) is asking for support with blueprint templates. He's getting an error. Please see the captures and also his original email to the feedback list at the bottom. Best regards, Miguel -------- Mensaje original -------- Asunto: RE: [Fiware-feedback] [FI-WARE] Contact form Fecha: Wed, 2 Jul 2014 09:53:05 +0000 De: Rob Manders <Rob.Manders@Q-ray.nl>< Rob.Manders@Q-ray.nl > Para: Miguel Carrillo <mcp@tid.es>< mcp@tid.es > Hello Miquel It is in the fi-lab. Environment Berlin. I was pointed to this request form by fi-space (issue in bitbucket). You can find it here: https://bitbucket.org/fispace/apps/issue/49/open-call-unable-to-create-tier-in To be sure I attach the screenshots to this mail. Met vriendelijke groet, Rob Manders Senior Consultant Q-ray BV Food, Feed & Flowers Agro Business Park 9 | Postbus 279 | 6700 AG Wageningen +31 317 471 371 (algemeen) | +31 317 471 369 (doorkiesnummer) | +31 6 26 23 41 40 (mobiel) www.Q-ray.nl< http://www.Q-ray.nl > | E: rob.manders@q-ray.nl< rob.manders@q-ray.nl > | KvK Centraal Gelderland: 09.133.924 Alles over onze mobiele oplossingen vindt u op AppsInBusiness.nl Dit bericht met eventuele bijlagen is vertrouwelijk en uitsluitend bestemd voor (rechts)persoon aan welke het is gericht. Als dit bericht niet voor u bestemd is, verzoeken wij u het bericht en eventuele bijlagen te verwijderen en contact op te nemen met de afzender. Hoewel afzender maatregelen heeft genomen om virussen in dit bericht en eventuele bijlagen te voorkomen, dient u ook zelf na te gaan of virussen aanwezig zijn aangezien afzender niet aansprakelijk is voor computervirussen die veroorzaakt zijn door dit bericht. Q-ray b.v. accepteert geen verantwoordelijkheid of aansprakelijkheid voor schade die voortvloeit uit de inhoud en/of de verzending van dit bericht. ---- Oorspronkelijk bericht ---- Van: Miguel Carrillo mcp@tid.es Verzonden: woensdag 2 juli 2014 11:30 Aan: Rob Manders; fiware-feedback@lists.fi-ware.eu< fiware-feedback@lists.fi-ware.eu > Onderwerp: Re: [Fiware-feedback] [FI-WARE] Contact form Dear Rob, Can you please identify the environment where you experienced this (FI-LAb or the Testbed)? Let me know and I will be happy to forward your request to the corresponding support list. Tip: when you need support I would advise to go to the support channel directly (it will save you time and steps). You get a "Need help?" link in the home page of both environments. Best regards, Miguel El 02/07/2014 10:28, FI-WARE escribió: > Rob Manders wrote: > > Hello > I am not able to create tiers in the blueprint. I get error 500: > > Error creating tier Tomcat6. Cause: 500 Error > > {"errors": [ {"message":"Internal PaasManager Server error# Could not > commit JPA transaction; nested exception is > javax.persistence.RollbackException: Transaction marked as > rollbackOnly", "code":500 } ] } > > I am also not able to clone from the catalog. After cloning the message is that the template clone is succesfull. It is however not shown in the list of templates. > I created some screenshots to illustrate the steps but I can not upload them using this form. > > _______________________________________________ > Fiware-feedback mailing list > Fiware-feedback@lists.fi-ware.org< Fiware-feedback@lists.fi-ware.org > > https://lists.fi-ware.org/listinfo/fiware-feedback > . > – ---------------------------------------------------------------------- / _/ / Miguel Carrillo Pacheco _/ _/ _/ _/ Telefónica Distrito Telefónica / _/ /_/ _/ _/ Investigación y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicación S/N / _/ / 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: mcp@tid.es< mcp@tid.es > Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at: http://www.tid.es/ES/PAGINAS/disclaimer.aspx ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at: http://www.tid.es/ES/PAGINAS/disclaimer.aspx ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at: http://www.tid.es/ES/PAGINAS/disclaimer.aspx _______________________________________________ Fiware-lab-help mailing list Fiware-lab-help@lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-lab-help

Manuel Escriche made changes - 01/Oct/14 9:58 AM

Field	Original Value	New Value
Assignee	Manuel Escriche [Administrator] [ mev ]	Miguel Carrillo Pacheco [ mcp ]

Miguel Carrillo made changes - 08/Oct/14 4:25 PM

Resolution		Done [ 10000 ]
Status	To Do [ 10001 ]	Done [ 10000 ]

Manuel Escriche made changes - 22/Oct/14 3:40 PM

Component/s

FIWARE-LAB-HELP [ 10279 ]

Manuel Escriche made changes - 22/Oct/14 4:01 PM

Workflow	Basic Workflow [ 12475 ]	FW eRequest Workflow [ 16191 ]
Issue Type	Question [ 10004 ]	eRequest [ 10101 ]
FI-WARE Environment	FI-LAB [ 10100 ]
Resolution	Done [ 10000 ]

Manuel Escriche made changes - 22/Oct/14 5:01 PM

Resolution

Done [ 10000 ]

Manuel Escriche made changes - 22/Oct/14 10:14 PM

Workflow

FW eRequest Workflow [ 16191 ]

eRequest Workflow-2 [ 16456 ]

Manuel Escriche made changes - 22/Oct/14 10:29 PM

Status

Done [ 10000 ]

In Progress [ 3 ]

Manuel Escriche made changes - 22/Oct/14 10:31 PM

Status

In Progress [ 3 ]

Done [ 10000 ]

Manuel Escriche made changes - 22/Oct/14 10:33 PM

Workflow

eRequest Workflow-2 [ 16456 ]

FW eRequest Workflow [ 16839 ]

Manuel Escriche made changes - 02/Nov/14 4:43 PM

Fix Version/s

Sprint 4.1.1 [ 10737 ]

Manuel Escriche made changes - 02/Nov/14 4:49 PM

Reporter

FIWARE-LAB-HELP [ fiware-lab-help ]

FW External User [ fw.external.urser ]

Manuel Escriche made changes - 12/Jan/16 9:10 AM

Workflow	FW eRequest Workflow [ 16839 ]	FW extRequest Workflow-II [ 41134 ]
Status	Done [ 10000 ]	Closed [ 6 ]
Issue Type	eRequest [ 10101 ]	extRequest [ 10104 ]

Backlog Manager made changes - 12/Jan/16 9:13 AM

Summary

[Fiware-lab-help] Fwd: RE: [Fiware-feedback] [FI-WARE] Contact form

FIWARE.Request.Lab.Fwd: RE: Contact form

Manuel Escriche made changes - 08/Apr/16 3:02 PM

Sender Email

mcp@tid.es

Manuel Escriche made changes - 12/Apr/16 4:29 PM

Component/s		FIWARE-GENERAL-HELP [ 10277 ]
Component/s	FIWARE-LAB-HELP [ 10279 ]

Backlog Manager made changes - 12/Apr/16 4:33 PM

Summary

FIWARE.Request.Lab.Fwd: RE: Contact form

FIWARE.Request.General.FIWARE.Request.Lab.Fwd: RE: Contact form

FIWARE.Request.General.FIWARE.Request.Lab.Fwd: RE: Contact form

Details

Description

Attachments

Activity

People

Dates

Agile