[HELC-854] FIWARE.Request.Coach.FINODEX.Re: W3DS - FIWARE - JIRA

Details

Type: extRequest
Status: Closed
Priority: Major
Resolution: Done
Component/s: FINODEX
Labels:
None

Description

Hi Sami,

First of all, as I mentioned in a previous email, I have put in Cc our
Fiware Accelerator (Finodex) coaches as they requested in a meeting with
them to follow the situation of each project that they are supporting.

About your previous email, the last release is working! I have test it in
our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works with
the data provided as test.
I have checked that the test requires the textures to have "texture" on
their names and "DEM" for terrain DEM. I have upload my data to test it but
I have the following problems:

1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see on
geoserver a grayscale image on openlayers (openlayers example
<http://151.80.143.120:8080/geoserver/fiware/wms?service=WMS&version=1.1.0&request=GetMap&layers=fiware:DEM_geotiff_terrain_EPSG3067&styles=&bbox=374010.0,7547990.0,380020.0,7554000.0&width=512&height=512&srs=EPSG:3067&format=application/openlayers>
).

I have seen that the tiff is a float32 image in grayscale with a 281.604
minimum value and 792.834 maximum value .

I have upload a similar DEM called "DEM_ODE_terrain" that it can be
selected from the DEM GIS Client example (on previous link). This image is
also float32 tiff with a minimum value of -3.40282e+38 and maximum
of 1545.84, where minimum value is a NoData value as it is shown with
gdalinfo command: NoData Value=-3.4028234663852886e+38
The TIF image I use it can be found here:
ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip
The geodesic system of this TIF is ETRS89 that correponds to SRS
EPSG:25830. However the preview seems to be a 0-1 grayscale image as you
can see here
<http://151.80.143.120:8080/geoserver/fiware/wms?service=WMS&version=1.1.0&request=GetMap&layers=fiware:DEM_ODE_terrain&styles=&bbox=461050.0,4700750.0,606500.0,4811750.0&width=512&height=390&srs=EPSG:25830&format=application/openlayers>
(takes
some seconds as it is big). This could be due to the NoData values that
make range so big not taking into account that the data does not exist.
This is correct?

2. The Terrain texture also has been uploaded to Geoserver as can be
seen here
<http://151.80.143.120:8080/geoserver/fiware/wms?service=WMS&version=1.1.0&request=GetMap&layers=fiware:ODE_terrain_texture_orto&styles=&bbox=-3.480675981601883,42.457568610196404,-1.6858572736097794,43.45901565397562&width=591&height=330&srs=EPSG:4326&format=application/openlayers>
.
The DEM testing client gives the oportunity to select both layers
mentioned (for terrain DEM + terrain texture), however nothing appears,
only one small gray square looking upwards (on zenith) with the camera on
the client as the altitudes are higher than the ones from the examples.

So everything from test seems to work correctly, but when I introduce my
data, the DEM test client does not seem to work.
Could it be due to NoData values? Anyway, why the ortophoto inserted is
shown as gray layer?

Best regards,
Ibon

2015-06-30 11:33 GMT+00:00 Sami J <sami.jylkka@cyberlightning.com>:

> Hi Ibon,
> sorry about late response. We have now made new release from both server
> and example client, these can be found from the forge under *MIWI-GISDataProvider
> 4.3.3*-release: https://forge.fiware.org/frs/?group_id=7
> source code has been uploaded also to the github.
>
> Short documentation related using DEM images can be found from:
> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module
>
> Installation document covers how to upload DEM image to geoserver:
> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation
>
>
> Regarding using latitude/longitude coordinates, I don't know if you are
> using them or not. I just wanted to mention this if you haven't noticed
> this information from the GIS GE documentation To elaborate further,
> provided GIS GE example web client has been implemented so that it works
> correctly only with metric coordinate system. Using lat/long data source
> won't work with the provided client, and that's why lat/long coordinate
> handling needs to be implemented by yourself. But as said, I don't know if
> you are using data source based in latitude/longitudes or metric
> coordinates.
>
>
> Best regards,
> Sami
>
> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia <ibon.salbi@gmail.com
> > wrote:
>
>> Hi Sami,
>>
>> I have a couple of things to ask.
>>
>> 1. It is great that the grayscale images for elevation is pretty much
>> ready. Can you tell me when do you expect to finish the test and when I can
>> be able to test it?
>> 2. About the last paragraph, I do not understand why you tell me that
>> lat/long is not supported. Where I have used it? Do you refer to the
>> bounding box of the layers I have upload? So do I have to change the SRS to
>> EPSG:25830 for example instead of EPSG:4326?
>>
>> Best regards,
>> Ibon
>>
>>
>> 2015-06-24 14:22 GMT+00:00 Sami J <sami.jylkka@cyberlightning.com>:
>>
>>> Hi Ibon,
>>> ok now it's clear; in a short problem is that elevation data in
>>> grayscale image is not yet supported by the GIS GE.
>>>
>>> The good thing is that implementation for it is pretty much ready, we
>>> are doing final testing for it and then documentation will be updated. So
>>> soon it is possible to use grayscale elevation images as for source to
>>> elevation data, GIS GE implementation supports same data format as SRTM
>>> data uses. GIS GE will send response data in octet-stream format, client
>>> itself needs to create 3D objects based on the octet-stream data.
>>>
>>> please note that current version of the GIS GE reference web client only
>>> supports metric coordinates, Lat/log is not working. I mention this because
>>> if you'd like to use GIS data in Lat/Log format, the client scenemanager
>>> logic needs to be re-implemented.
>>>
>>> Best regards,
>>> Sami
>>>
>>>
>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia <
>>> ibon.salbi@gmail.com> wrote:
>>>
>>>> Hi Sami,
>>>>
>>>> I have upload the ortophoto on "fiware" workspace and also texture with
>>>> appropriate names to be able to see them in my Client examples:
>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml
>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml
>>>>
>>>> As you will see, selecting the terrain texture, the new layer appears
>>>> (surprisingly, the one of other workspace also). But if I try to select the
>>>> terrain layer (first box of GIS client), you will see that the one uploaded
>>>> with the name "ODE_test_terrain" does not appear. Maybe I didn't explain
>>>> correctly in my previous email, but this layer is the altitude layer, the
>>>> shape. So I suppose that the W3DS options have to be defined, but if you
>>>> access to that layer on our testing server (
>>>> http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver)
>>>> you will see that I cannot access to the W3DS tab of "ODE_test_terrain"
>>>> layer to make it "Active" and "Queryable" and maybe other options required
>>>> on the GIS client to be able to require it as the shape of the terrain.
>>>>
>>>> Which could be the problem?
>>>>
>>>> Just one more thing. I am selected on one of the FIWARE accelerators
>>>> (Finodex) to develop services with Fiware tools. As you imagine, this
>>>> enabler is one that I am using. They required me to put them (fiware
>>>> coaches of Finodex accelerator) in CC on this discussion emails to follow
>>>> the evolution of our project. So I will put them in CC on the next email. I
>>>> suppose there is no problem on this, is it?
>>>>
>>>> Best regards,
>>>> Ibon
>>>>
>>>>
>>>> 2015-06-23 8:38 GMT+02:00 Sami J <sami.jylkka@cyberlightning.com>:
>>>>
>>>>> Hi Ibon,
>>>>> thank you for the feedback, I need to update user guide about this
>>>>> issue. Textures are queried via geoserver's WMS-interface. This interface
>>>>> isn't related to W3DS-module and therefore there's no need to declare
>>>>> W3DS related options for the texture layer. So when you define
>>>>> texture layer which you want to use as a texture for 3D terrain, it is
>>>>> enough to define options under "Data"-tab.
>>>>>
>>>>> Best regards,
>>>>> Sami
>>>>>
>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia <
>>>>> ibon.salbi@gmail.com> wrote:
>>>>>
>>>>>> Hi Sami,
>>>>>>
>>>>>> Thank you. Yes I knew that because I saw it in the JS code you
>>>>>> mention.
>>>>>> I was going to change the ortophoto and texture to workspace to
>>>>>> "fiware" for that reason, but being honest I didn't test it because I found
>>>>>> the error I described in my previous email. I mean, I was trying to access
>>>>>> the texture layer W3DS tab to make it "Active" and "Queryable" as required
>>>>>> on the wiki, so that's the reason I sent you the error, because I though
>>>>>> that it wouldn't be possible to go ahead without changing the texture the
>>>>>> configuration.
>>>>>>
>>>>>> So, if I am wrong and it is not necessary to configure the W3DS tab,
>>>>>> I will try it. I don't need from you to change the JS code to find texture
>>>>>> and photos of all the workspace. I will change the data to "fiware"
>>>>>> workspae.
>>>>>>
>>>>>> I will tell you if everything goes well.
>>>>>> Best regards,
>>>>>>
>>>>>> Ibon
>>>>>>
>>>>>>
>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J <sami.jylkka@cyberlightning.com>:
>>>>>>
>>>>>>> Hi Ibon,
>>>>>>> nice to hear you have been able to progress in your work!
>>>>>>>
>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In case
>>>>>>> you are using GIS GE reference client problem with the texture loading
>>>>>>> might be with the used workspace. GIS GE reference client assumes that all
>>>>>>> data is in "fiware"-workspace. This applies also for the textures. So
>>>>>>> changing texture workspace to "fiware" might solve loading problem.
>>>>>>>
>>>>>>> If you'd like to modify reference client to support also other
>>>>>>> workspaces, URI for texture loading is defined in the scenemngr.js
>>>>>>> getElements-function. You can modify URL created in there.
>>>>>>>
>>>>>>> Best regards,
>>>>>>> Sami
>>>>>>>
>>>>>>>
>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyvärinen <
>>>>>>> juha.hyvarinen@cyberlightning.com> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> ---------- Forwarded message ----------
>>>>>>>> From: Ibon Salbidegoitia <ibon.salbi@gmail.com>
>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM
>>>>>>>> Subject: Re: W3DS - FIWARE
>>>>>>>> To: Juha Hyvärinen <juha.hyvarinen@cyberlightning.com>
>>>>>>>>
>>>>>>>>
>>>>>>>> Hi Juha,
>>>>>>>>
>>>>>>>> I checked that many changes where done on the data and wiki.
>>>>>>>> Congratulations! Now everything is very clear!
>>>>>>>>
>>>>>>>> I write you because I have some doubts about the texture data. On
>>>>>>>> the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the
>>>>>>>> last sentence says that one option is to store texture on a GeoTIFF.
>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 format
>>>>>>>> to try it. You can download it here:
>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip
>>>>>>>>
>>>>>>>> The file has been uploaded to Geoserver. As it does not recognize
>>>>>>>> the SRS, I defined whichis the EPSG:25830.
>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to
>>>>>>>> activate and make it queryable.
>>>>>>>> However, it returns an error on JIRA.
>>>>>>>>
>>>>>>>> You can check it in our geoserver:
>>>>>>>> http://151.80.143.120:8080/geoserver/
>>>>>>>> + User: admin
>>>>>>>> + Pass: geoserver
>>>>>>>>
>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on
>>>>>>>> workspace "ODE"
>>>>>>>> Please let me know why this option is not available.
>>>>>>>> Best regards,
>>>>>>>>
>>>>>>>> Ibon
>>>>>>>>
>>>>>>>>
>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia <ibon.salbi@gmail.com
>>>>>>>> >:
>>>>>>>>
>>>>>>>>> Hi Juha,
>>>>>>>>>
>>>>>>>>> I have been able to run GIS Client examples:
>>>>>>>>> +
>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml
>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml
>>>>>>>>>
>>>>>>>>> As you can see in the attached pictures, there seems to be some
>>>>>>>>> problems with space between layers and I cannot see the xml3d buildings on
>>>>>>>>> the examples.
>>>>>>>>> Do you know where the buildings should appear?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Just as comment, I have found more bugs that may improve the Unit
>>>>>>>>> Testing Plan. I list all of them below if you are interested on changing
>>>>>>>>> them
>>>>>>>>>
>>>>>>>>> On wiki:
>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer
>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS Database
>>>>>>>>> In "Objects Attributes" section select "name" for the
>>>>>>>>> "Object ID" it is not possible because only options are [elevation / geom /
>>>>>>>>> lod]. The documentation seems to need to select "name" when it does not
>>>>>>>>> exist.
>>>>>>>>>
>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif
>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif
>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as it
>>>>>>>>> is said on the wiki
>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif
>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as it
>>>>>>>>> is said on the wiki
>>>>>>>>>
>>>>>>>>> On GIS Client:
>>>>>>>>> Version 4.3.2
>>>>>>>>> + The both examples () have changed the script "map.js" and now
>>>>>>>>> it is not automatically defined "baseUrl" variable as previous version
>>>>>>>>> 4.2.2. It will be recommended to use the code lines:
>>>>>>>>> var ip = location.host;
>>>>>>>>> var baseUrl = "http://"ip"/geoserver/";
>>>>>>>>>
>>>>>>>>> On MIWI-GISDataProvider download section:
>>>>>>>>> + Version 4.3.2
>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text and
>>>>>>>>> version numbers ->
>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip
>>>>>>>>> - ZIP file when decompressed has a folder with a space
>>>>>>>>> between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2
>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and
>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name.
>>>>>>>>> + Version 4.2.2
>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and
>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name.
>>>>>>>>>
>>>>>>>>> Best regards,
>>>>>>>>>
>>>>>>>>> Ibon
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyvärinen <
>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>
>>>>>>>>>> Hi Ibon,
>>>>>>>>>>
>>>>>>>>>> Thank you for feedback about test asset naming problems, I wasn't
>>>>>>>>>> aware of those and I have informed my colleague who have made those
>>>>>>>>>> packages. He will fix those tomorrow.
>>>>>>>>>>
>>>>>>>>>> Building coordinates are needed if you want to use external 3D
>>>>>>>>>> models in your application with real spatial information. For example hand
>>>>>>>>>> made building models placed in correct position etc. If you don't need
>>>>>>>>>> those then that step is optional.
>>>>>>>>>>
>>>>>>>>>> We also updated guide for database restoring and it can be found
>>>>>>>>>> from here:
>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data
>>>>>>>>>>
>>>>>>>>>> Your problem was that username in the database backup was defined
>>>>>>>>>> to be 'sami' and it does not exist in your system. It is fixed by ignoring
>>>>>>>>>> username from the database backup.
>>>>>>>>>>
>>>>>>>>>> Before restoring that database backup you should drop
>>>>>>>>>> fiware_test_terrain table.
>>>>>>>>>>
>>>>>>>>>> Let me know if this was helpful.
>>>>>>>>>>
>>>>>>>>>> - Juha
>>>>>>>>>>
>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia <
>>>>>>>>>> ibon.salbi@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Sorry I send previous email without finishing the email as
>>>>>>>>>>> error. You have below all the email.
>>>>>>>>>>>
>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>
>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had some
>>>>>>>>>>> problems with tomcat so I decided to format everything and start from the
>>>>>>>>>>> beginning to know what errors are happening.
>>>>>>>>>>> I will try to explain cronologically all the steps and
>>>>>>>>>>> error/bugs found.
>>>>>>>>>>>
>>>>>>>>>>> First of all I update git repository and change to the
>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn
>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds
>>>>>>>>>>> After restarting tomcat, the geoserver seems to work ->
>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin /
>>>>>>>>>>> Pass: geoserver)
>>>>>>>>>>> I did not use the WAR published, I created my own from the new
>>>>>>>>>>> github branch as you see.
>>>>>>>>>>>
>>>>>>>>>>> So then I decided to update the test unit plan. Here I have one
>>>>>>>>>>> comment just to improve in case you want. I have checked that you usually
>>>>>>>>>>> use "space" on folders and files which usually is no suitable. I refer
>>>>>>>>>>> specificly to the 4.3.2 version.
>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to use
>>>>>>>>>>> ASCI character to download: wget --no-check-certificate
>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip
>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also a
>>>>>>>>>>> "space": /home/UnitTestPlan/rel\ 4.3.2
>>>>>>>>>>> + PostGIS database backup has also a "space" at the
>>>>>>>>>>> end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ /
>>>>>>>>>>>
>>>>>>>>>>> Any way, I continue with the database restore. On the PostGIS
>>>>>>>>>>> database backup, I checked on the 4.3.2 version that there are 2
>>>>>>>>>>> files: building_coordinates and test_asset-terrain.
>>>>>>>>>>> The "building_coordinates" file appears to be a text format
>>>>>>>>>>> dump. So is this file necessary to upload to database?
>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with the
>>>>>>>>>>> following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\
>>>>>>>>>>> 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain
>>>>>>>>>>> However, I receive the following errors:
>>>>>>>>>>> =================================================
>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC:
>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 65659
>>>>>>>>>>> TABLE fiware_test_terrain sami
>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR:
>>>>>>>>>>> role "sami" does not exist
>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER TO
>>>>>>>>>>> sami;
>>>>>>>>>>>
>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 65657
>>>>>>>>>>> SEQUENCE fiware_test_terrain_id_seq sami
>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR:
>>>>>>>>>>> role "sami" does not exist
>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq
>>>>>>>>>>> OWNER TO sami;
>>>>>>>>>>>
>>>>>>>>>>> WARNING: errors ignored on restore: 2
>>>>>>>>>>> =================================================
>>>>>>>>>>>
>>>>>>>>>>> I checked the information stored from backup on the database and
>>>>>>>>>>> found the following tables, which I am not sure if they are all or there
>>>>>>>>>>> are some missing.
>>>>>>>>>>> =================================================
>>>>>>>>>>> List of relations
>>>>>>>>>>> Schema | Name | Type | Owner
>>>>>>>>>>> -----------------------------------------+---------
>>>>>>>>>>> public | fiware_test_terrain | table | postgres
>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres
>>>>>>>>>>> public | geography_columns | view | postgres
>>>>>>>>>>> public | geometry_columns | view | postgres
>>>>>>>>>>> public | raster_columns | view | postgres
>>>>>>>>>>> public | raster_overviews | view | postgres
>>>>>>>>>>> public | spatial_ref_sys | table | postgres
>>>>>>>>>>> =================================================
>>>>>>>>>>>
>>>>>>>>>>> I did not continue because it seems that there are some errors
>>>>>>>>>>> that I should first understand and fix before continuing.
>>>>>>>>>>> If you need something else from my side, please let me know. And
>>>>>>>>>>> please, let me know if I have done something wrong.
>>>>>>>>>>> Thank you. Best regards,
>>>>>>>>>>>
>>>>>>>>>>> Ibon
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia <
>>>>>>>>>>> ibon.salbi@gmail.com>:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>
>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had
>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from
>>>>>>>>>>>> the beginning to know what errors are happening.
>>>>>>>>>>>> I will try to explain cronologically all the steps and
>>>>>>>>>>>> error/bugs found.
>>>>>>>>>>>>
>>>>>>>>>>>> First of all I update git repository and change to the
>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn
>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds
>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work ->
>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin /
>>>>>>>>>>>> Pass: geoserver)
>>>>>>>>>>>> I did not use the WAR published, I created my own from the new
>>>>>>>>>>>> github branch as you see.
>>>>>>>>>>>>
>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have one
>>>>>>>>>>>> comment just to improve in case you want. I have checked that you usually
>>>>>>>>>>>> use "space" on folders and files which usually is no suitable. I refer
>>>>>>>>>>>> specificly to the 4.3.2 version.
>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to
>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate
>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip
>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also
>>>>>>>>>>>> a "space": /home/UnitTestPlan/rel\ 4.3.2
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>
>>>>>>>>>>>>> That problem should now be fixed, code is in the github (
>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x)
>>>>>>>>>>>>> and we have also published new war file in Fiware FusionForge (
>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1643/geoserver.war).
>>>>>>>>>>>>>
>>>>>>>>>>>>> We also updated test assets and reference client. Updated
>>>>>>>>>>>>> reference client is already available from the Github and test assets will
>>>>>>>>>>>>> be published later today or tomorrow morning to FusionForge under release
>>>>>>>>>>>>> 4.3.2 (https://forge.fiware.org/frs/?group_id=7).
>>>>>>>>>>>>>
>>>>>>>>>>>>> I hope that this release will fix problems you encountered
>>>>>>>>>>>>> earlier. Please report back did this solve those problems. Thank you for
>>>>>>>>>>>>> submitting these bug reports.
>>>>>>>>>>>>>
>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyvärinen <
>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> We have looked into that problem now for couple of days and
>>>>>>>>>>>>>> it seems to be somehow related to Tomcat and system locale settings. We can
>>>>>>>>>>>>>> reproduce same problem when we deploy to a Tomcat instance while with Jetty
>>>>>>>>>>>>>> everything works just fine.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm working with the fix now, but there is also a workaround:
>>>>>>>>>>>>>> deploy war package to a Jetty instance.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyvärinen <
>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer test
>>>>>>>>>>>>>>> client which we will release officially during summer, but code is already
>>>>>>>>>>>>>>> available from the Github:
>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Client code can be found from here:
>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyvärinen <
>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain
>>>>>>>>>>>>>>>> problem, since I couldn't replicate it. Everything seems to be right at the
>>>>>>>>>>>>>>>> server side but still data is somehow corrupted when it arrives to the
>>>>>>>>>>>>>>>> client. We have deployed that same data set without any problems to more
>>>>>>>>>>>>>>>> than 20 different systems by many different users during our internal
>>>>>>>>>>>>>>>> development and testing.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> There are still few points which you could try.
>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu
>>>>>>>>>>>>>>>> repositories instead of manually build one.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. This
>>>>>>>>>>>>>>>> shouldn't be difficult, since you already build your own version.
>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to
>>>>>>>>>>>>>>>> pull new changes from the repository and change code branch from fiware to
>>>>>>>>>>>>>>>> fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild
>>>>>>>>>>>>>>>> project.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Also I created database dump from building coordinates
>>>>>>>>>>>>>>>> table and it's as an attachment. We will add it also to the assets and
>>>>>>>>>>>>>>>> update documentation once we have little spare time to do it. Table can be
>>>>>>>>>>>>>>>> restored with command: sudo -u postgres psql databasename <
>>>>>>>>>>>>>>>> path/to/the/file.sql
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point a
>>>>>>>>>>>>>>>> place where you actually have that xml file. At the moment URL is
>>>>>>>>>>>>>>>> http://localhost/Test_asset/Building_model/building.xml
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia <
>>>>>>>>>>>>>>>> ibon.salbi@gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default
>>>>>>>>>>>>>>>>> start-up configuration file.
>>>>>>>>>>>>>>>>> Now is using openJDK.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses Oracle
>>>>>>>>>>>>>>>>>> java 1.8.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>> ibon.salbi@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. I
>>>>>>>>>>>>>>>>>>> restarted and modify xmx to avoid errors.
>>>>>>>>>>>>>>>>>>> Asnwering to your comments:
>>>>>>>>>>>>>>>>>>> + Please let me know when you update the
>>>>>>>>>>>>>>>>>>> documentation to check importin building coordinates
>>>>>>>>>>>>>>>>>>> + I imported with following command of postgres:
>>>>>>>>>>>>>>>>>>> $ su - postgres
>>>>>>>>>>>>>>>>>>> $ createdb fiware_test
>>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test
>>>>>>>>>>>>>>>>>>> ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset
>>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use
>>>>>>>>>>>>>>>>>>> pgadmin, but the import was correct without errors and I checked that the
>>>>>>>>>>>>>>>>>>> data was correct.
>>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will change
>>>>>>>>>>>>>>>>>>> it to openJDK7 as you recommend. Now is changed to openJDK7 to version
>>>>>>>>>>>>>>>>>>> 1.7.0_79
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can check on
>>>>>>>>>>>>>>>>>>> it whatever you want.
>>>>>>>>>>>>>>>>>>> Kind regards,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but your
>>>>>>>>>>>>>>>>>>>> server went down before I could figure out any final solution. Here are my
>>>>>>>>>>>>>>>>>>>> thoughts so far.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I noticed that something have went wrong at least with
>>>>>>>>>>>>>>>>>>>> building coordinate importing and we will update documentation how to
>>>>>>>>>>>>>>>>>>>> import those properly. I can notice you once that is done.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I also would like to make sure that
>>>>>>>>>>>>>>>>>>>> fiware:fiware_test_terrain is data set provided by us and you imported it
>>>>>>>>>>>>>>>>>>>> to the database as instructed with pgAdmin?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Third point: in the past I had some problems with
>>>>>>>>>>>>>>>>>>>> Geoserver when we used Oracle java, so please make sure that you use
>>>>>>>>>>>>>>>>>>>> openJDK7. You can check used Java version with commad:
>>>>>>>>>>>>>>>>>>>> java -version
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> result should be something similar:
>>>>>>>>>>>>>>>>>>>> -----------------
>>>>>>>>>>>>>>>>>>>> :~$ java -version
>>>>>>>>>>>>>>>>>>>> java version "1.7.0_79"
>>>>>>>>>>>>>>>>>>>> OpenJDK Runtime Environment (IcedTea 2.5.5)
>>>>>>>>>>>>>>>>>>>> (7u79-2.5.5-0ubuntu0.14.04.2)
>>>>>>>>>>>>>>>>>>>> OpenJDK 64-Bit Server VM (build 24.79-b02, mixed mode)
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> If not, change default java version with command:
>>>>>>>>>>>>>>>>>>>> sudo update-alternatives --config java
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Mon, May 18, 2015 at 10:34 AM, Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>>> ibon.salbi@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> The last couple of months I have been learning and
>>>>>>>>>>>>>>>>>>>>> understanding all the things that we discussed 2 months ago.
>>>>>>>>>>>>>>>>>>>>> Once I knew how to do most of the things, I tried to
>>>>>>>>>>>>>>>>>>>>> do the "Unit Testing Plan" from the Wiki (
>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan
>>>>>>>>>>>>>>>>>>>>> )
>>>>>>>>>>>>>>>>>>>>> I have found some bugs/errors that I think they should
>>>>>>>>>>>>>>>>>>>>> be corrected if possible:
>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.2.3 PostGIS connection to GeoServer
>>>>>>>>>>>>>>>>>>>>> + terrain_texture_raste has a EPSG:404000 SRS (set by
>>>>>>>>>>>>>>>>>>>>> default)
>>>>>>>>>>>>>>>>>>>>> + terrain_texture_orto has a EPSG:3067 SRS (set by
>>>>>>>>>>>>>>>>>>>>> default)
>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.3.2 terrain_texture_orto.tif and
>>>>>>>>>>>>>>>>>>>>> terrain_texture_raster.tif
>>>>>>>>>>>>>>>>>>>>> + On building_coordinates SRS is not automatically
>>>>>>>>>>>>>>>>>>>>> assigned
>>>>>>>>>>>>>>>>>>>>> + On building_coordinates table, when SRS EPSG:3047
>>>>>>>>>>>>>>>>>>>>> value is introduced manually, the "Bounding Box" values seem to be wrong
>>>>>>>>>>>>>>>>>>>>> assigned
>>>>>>>>>>>>>>>>>>>>> + Select Activate and Queryable in the W3DS Settings,
>>>>>>>>>>>>>>>>>>>>> it is not clear if it is for both tables
>>>>>>>>>>>>>>>>>>>>> + In Objects Attributes select name for the Object ID.
>>>>>>>>>>>>>>>>>>>>> Only for building_coordinates table, because fiware_test_terrain table has
>>>>>>>>>>>>>>>>>>>>> not got this Object ID.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I have follow everything sucessfully but at the end,
>>>>>>>>>>>>>>>>>>>>> it is not possible to see the correct result (
>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/GIS/). I am not sure if it is
>>>>>>>>>>>>>>>>>>>>> for the "building_coordinates" bounding box values or what.
>>>>>>>>>>>>>>>>>>>>> You can check on Geoserver that everything is correct (
>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/geoserver User: admin Pass:
>>>>>>>>>>>>>>>>>>>>> geoserver. The server is a server to test this W3DS service only, so you
>>>>>>>>>>>>>>>>>>>>> can use it without any problems)
>>>>>>>>>>>>>>>>>>>>> So something seems that it is not correctly working.
>>>>>>>>>>>>>>>>>>>>> What can it be? (All the data was correctly imported to PostGIS without
>>>>>>>>>>>>>>>>>>>>> errors)
>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Best regards,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> 2015-03-26 7:42 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I have been out of office and didn't have time to
>>>>>>>>>>>>>>>>>>>>>> reply earlier.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> EPSG:900913 is map projection defined by Google and
>>>>>>>>>>>>>>>>>>>>>> it's using lat/lon coordinates. At the moment requesting data from
>>>>>>>>>>>>>>>>>>>>>> non-metric coordinate systems will result erroneous output. Some projection
>>>>>>>>>>>>>>>>>>>>>> tools may use that as a default projection if it's undefined. I suggest
>>>>>>>>>>>>>>>>>>>>>> that you check your projection definitions from importing code and if you
>>>>>>>>>>>>>>>>>>>>>> didn't set any coordinate system set one.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I also quickly checked that one tile you provided and
>>>>>>>>>>>>>>>>>>>>>> there was a lot no-data values. You could probably get better results if
>>>>>>>>>>>>>>>>>>>>>> you select input data from area where there are actually data to show.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Please note that only UTM coordinate systems (or
>>>>>>>>>>>>>>>>>>>>>> similar) are supported by W3DS module.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> For visualization you can use sample client provided
>>>>>>>>>>>>>>>>>>>>>> within FIWARE project. It is quite simple and you shouldn't have any
>>>>>>>>>>>>>>>>>>>>>> problems to understand how it does requests to the server and visualize
>>>>>>>>>>>>>>>>>>>>>> received 3D data.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Mar 18, 2015 at 10:11 AM, Ibon Salbidegoitia
>>>>>>>>>>>>>>>>>>>>>> <ibon.salbi@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I have been searching and found that my data is
>>>>>>>>>>>>>>>>>>>>>>> in EPSG:900913 and now the layer is published and I can see it.
>>>>>>>>>>>>>>>>>>>>>>> Is this the correct way to publish it?
>>>>>>>>>>>>>>>>>>>>>>> So now, I am supposed to use the 3D capabilities to
>>>>>>>>>>>>>>>>>>>>>>> visualize in 3D. I have checked the XML3D link that you sent me but I don't
>>>>>>>>>>>>>>>>>>>>>>> understand how I have to apply to visualize the layer in 3D.
>>>>>>>>>>>>>>>>>>>>>>> Can you please be more specific or give me some help?
>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> 2015-03-18 7:13 GMT+00:00 Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi@gmail.com>:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> I have been able to introduce the XYZ files (*.asc
>>>>>>>>>>>>>>>>>>>>>>>> in my case) to the Postgre database with the PostGIS extension.
>>>>>>>>>>>>>>>>>>>>>>>> I am able to see the layer from the Geoserver but I
>>>>>>>>>>>>>>>>>>>>>>>> have some doubts about the data to be introduced that I don't know how to
>>>>>>>>>>>>>>>>>>>>>>>> fill when Geoserver asks for publishing the layer.
>>>>>>>>>>>>>>>>>>>>>>>> I have followed the following command lines to
>>>>>>>>>>>>>>>>>>>>>>>> introduce the data to database which I will appreciate if you can tell me
>>>>>>>>>>>>>>>>>>>>>>>> if they are correct. And also, I would like to know how can I publish the
>>>>>>>>>>>>>>>>>>>>>>>> layer because the link that you send me doesn't give me enough information
>>>>>>>>>>>>>>>>>>>>>>>> to be able for that.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ==============================================================================================================
>>>>>>>>>>>>>>>>>>>>>>>> ===== Download the XYZ data as *.asc file =====
>>>>>>>>>>>>>>>>>>>>>>>> $ mkdir /root/data
>>>>>>>>>>>>>>>>>>>>>>>> $ cd /root/data
>>>>>>>>>>>>>>>>>>>>>>>> $ wget
>>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT/H0037/mdt_037_1_8.zip
>>>>>>>>>>>>>>>>>>>>>>>> $ unzip mdt_037_1_8.zip
>>>>>>>>>>>>>>>>>>>>>>>> $ gdal_polygonize.py -f "ESRI Shapefile"
>>>>>>>>>>>>>>>>>>>>>>>> mdt_037_1_8.asc mdt_037_1_8.shp
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ===== Create database on Postgre as postgres user
>>>>>>>>>>>>>>>>>>>>>>>> =====
>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres
>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d postgres
>>>>>>>>>>>>>>>>>>>>>>>> $ create database [yourdatabase];
>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE DATABASE
>>>>>>>>>>>>>>>>>>>>>>>> $ \list
>>>>>>>>>>>>>>>>>>>>>>>> $ \q
>>>>>>>>>>>>>>>>>>>>>>>> $ psql -d [yourdatabase] -c "CREATE EXTENSION
>>>>>>>>>>>>>>>>>>>>>>>> postgis;"
>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE EXTENSION
>>>>>>>>>>>>>>>>>>>>>>>> $ exit
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ===== Define Postgre password =====
>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres
>>>>>>>>>>>>>>>>>>>>>>>> $ \password postgres
>>>>>>>>>>>>>>>>>>>>>>>> $ \q
>>>>>>>>>>>>>>>>>>>>>>>> $ exit
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ===== Import data with "shp2pgsql" utility of
>>>>>>>>>>>>>>>>>>>>>>>> postgis (
>>>>>>>>>>>>>>>>>>>>>>>> http://www.bostongis.com/pgsql2shp_shp2pgsql_quickguide.bqg)
>>>>>>>>>>>>>>>>>>>>>>>> =====
>>>>>>>>>>>>>>>>>>>>>>>> $ /root/postgis-2.1.0/loader/shp2pgsql
>>>>>>>>>>>>>>>>>>>>>>>> /root/data/mdt_037_1_8.shp >sql
>>>>>>>>>>>>>>>>>>>>>>>> -> Shapefile type: Polygon
>>>>>>>>>>>>>>>>>>>>>>>> -> Postgis type: MULTIPOLYGON[2]
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ===== Import created sql to postgre =====
>>>>>>>>>>>>>>>>>>>>>>>> $ mv sql /var/lib/postgresql/
>>>>>>>>>>>>>>>>>>>>>>>> $ chmod 777 /var/lib/postgresql/sql
>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres
>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -f sql
>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -c "\d"
>>>>>>>>>>>>>>>>>>>>>>>> -> List of relations
>>>>>>>>>>>>>>>>>>>>>>>> -> Schema | Name | Type |
>>>>>>>>>>>>>>>>>>>>>>>> Owner
>>>>>>>>>>>>>>>>>>>>>>>> ->
>>>>>>>>>>>>>>>>>>>>>>>> ----------------------------------+---------
>>>>>>>>>>>>>>>>>>>>>>>> -> public | geography_columns | view |
>>>>>>>>>>>>>>>>>>>>>>>> postgres
>>>>>>>>>>>>>>>>>>>>>>>> -> public | geometry_columns | view |
>>>>>>>>>>>>>>>>>>>>>>>> postgres
>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8 | table |
>>>>>>>>>>>>>>>>>>>>>>>> postgres
>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8_gid_seq | sequence |
>>>>>>>>>>>>>>>>>>>>>>>> postgres
>>>>>>>>>>>>>>>>>>>>>>>> -> ...
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> $ exit
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new workspace =====
>>>>>>>>>>>>>>>>>>>>>>>> + Name: Fiware
>>>>>>>>>>>>>>>>>>>>>>>> + URI of name space: com.fiware
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new "Data store" on Geoserver (
>>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver) =====
>>>>>>>>>>>>>>>>>>>>>>>> + Select the "PostGIS - PostGIS Database" vectorial
>>>>>>>>>>>>>>>>>>>>>>>> data
>>>>>>>>>>>>>>>>>>>>>>>> + Add data required:
>>>>>>>>>>>>>>>>>>>>>>>> + Workspace: Fiware
>>>>>>>>>>>>>>>>>>>>>>>> + Name of origin data: Fiware_Test1
>>>>>>>>>>>>>>>>>>>>>>>> + database: fiwaretest1
>>>>>>>>>>>>>>>>>>>>>>>> + host: localhost
>>>>>>>>>>>>>>>>>>>>>>>> + port: 5432
>>>>>>>>>>>>>>>>>>>>>>>> + user: postgres
>>>>>>>>>>>>>>>>>>>>>>>> + pass: postgres
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new layer and make public =====
>>>>>>>>>>>>>>>>>>>>>>>> + Edit layer features?¿?
>>>>>>>>>>>>>>>>>>>>>>>> + SRS?
>>>>>>>>>>>>>>>>>>>>>>>> + ...
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ==============================================================================================================
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 13:42 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Yes, write all polygons to a single shp file or to
>>>>>>>>>>>>>>>>>>>>>>>>> a single table inside a database and you are good to go.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I would recommend that you also study some basics
>>>>>>>>>>>>>>>>>>>>>>>>> about rendering engines and search general knowledge what data 3D models
>>>>>>>>>>>>>>>>>>>>>>>>> really keeps inside them.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> In FIWARE we use XML3D as a rendering engine and
>>>>>>>>>>>>>>>>>>>>>>>>> all 3D models produced by GeoServer are in XML3D format.
>>>>>>>>>>>>>>>>>>>>>>>>> Here is one guide how to use XML3D rendering
>>>>>>>>>>>>>>>>>>>>>>>>> engine:
>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/xml3d/xml3d.js/wiki/The-Basics-of-XML3D
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:53 PM, Ibon Salbidegoitia
>>>>>>>>>>>>>>>>>>>>>>>>> <ibon.salbi@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your clarifications.
>>>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about your comments.
>>>>>>>>>>>>>>>>>>>>>>>>>> I understand how do I have to create the
>>>>>>>>>>>>>>>>>>>>>>>>>> polygons. I have done a python script with the for loops as you said
>>>>>>>>>>>>>>>>>>>>>>>>>> (attached) which creates the POLIGONZs.
>>>>>>>>>>>>>>>>>>>>>>>>>> I have done a SHP file for each polygon, but
>>>>>>>>>>>>>>>>>>>>>>>>>> should I do a single SHP with all the polygons? I suppose that I should do
>>>>>>>>>>>>>>>>>>>>>>>>>> a single SHP because I can have many polygons if the resolution is too
>>>>>>>>>>>>>>>>>>>>>>>>>> high. Or this is not possible?
>>>>>>>>>>>>>>>>>>>>>>>>>> The procedure of writting data to database with psycopg2
>>>>>>>>>>>>>>>>>>>>>>>>>> is similar, so the same question, all polygons together is it possible?
>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 11:35 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> I have just updated User and Programmers guide.
>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that these tips helps you forward.
>>>>>>>>>>>>>>>>>>>>>>>>>>> Added content:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Data generation from *.xyz file format
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is a small sample from source dataset:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Easting Northing Elevation
>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7542000.000 279.950
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541990.000 281.002
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541980.000 282.096
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541980.000 280.944
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> That data produces following 2D grid:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> |------------------------------------------------|-------------------------------------------------|------------------------------------------------|
>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 | 398000.000 7542000.000 279.950 |
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 | 398020.000 7542000.000 278.818 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> |------------------------------------------------|-------------------------------------------------|------------------------------------------------|
>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 | 398000.000 7541990.000 281.002 |
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 | 398020.000 7541990.000 279.847 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> |------------------------------------------------|-------------------------------------------------|------------------------------------------------|
>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 | 398000.000 7541980.000 282.096 |
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 | 398020.000 7541980.000 280.944 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> |------------------------------------------------|-------------------------------------------------|------------------------------------------------|
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> From that grid we can create polygons
>>>>>>>>>>>>>>>>>>>>>>>>>>> representing terrain surface.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> WKT polygons generated from that dataset should
>>>>>>>>>>>>>>>>>>>>>>>>>>> look like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7542000.000 279.950,
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388, 398010.000 7541990.000 280.436, 398000.000
>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 281.002, 398000.000 7542000.000 279.950))
>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7542000.000 279.388,
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818, 398020.000 7541990.000 279.847, 398010.000
>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 280.436, 398010.000 7542000.000 279.388))
>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7541990.000 281.002,
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436, 398010.000 7541980.000 281.539, 398000.000
>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 282.096, 398000.000 7541990.000 281.002))
>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7541990.000 280.436,
>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847, 398020.000 7541980.000 280.944, 398010.000
>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 281.539, 398010.000 7541990.000 280.436))
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> NOTE: It is said in WKT specification that
>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons needs to be closed, meaning that start and end points are the same.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Each polygon should be written into a PostGIS
>>>>>>>>>>>>>>>>>>>>>>>>>>> database or into a shape file.
>>>>>>>>>>>>>>>>>>>>>>>>>>> - Shapefile writing can be done for example with
>>>>>>>>>>>>>>>>>>>>>>>>>>> python library called pyshp (
>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/GeospatialPython/pyshp).
>>>>>>>>>>>>>>>>>>>>>>>>>>> - PostGIS can be used for example with psycopg2
>>>>>>>>>>>>>>>>>>>>>>>>>>> library (http://initd.org/psycopg/).
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Depending on selected storage format choose
>>>>>>>>>>>>>>>>>>>>>>>>>>> corresponding publishing steps for data publishing into a W3DS layer with
>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer.
>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a
>>>>>>>>>>>>>>>>>>>>>>>>>>> shapefile:
>>>>>>>>>>>>>>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/shapefile-quickstart/index.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a
>>>>>>>>>>>>>>>>>>>>>>>>>>> PostGIS table:
>>>>>>>>>>>>>>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/postgis-quickstart/index.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Adding texture
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Raster data (f.ex. ortophotos) is used as
>>>>>>>>>>>>>>>>>>>>>>>>>>> terrain texture and guide how to work with rasters can be found from here:
>>>>>>>>>>>>>>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/data/raster/index.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Mar 2, 2015 at 6:23 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the steps. However, I would like
>>>>>>>>>>>>>>>>>>>>>>>>>>>> to clarify some things to have clear what I should do.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Imagine I have the data:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> lat lon alt
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 0 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 1 5
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 0 5
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 1 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 0 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 2 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is like a flat surface. So I have to
>>>>>>>>>>>>>>>>>>>>>>>>>>>> create a 2D array like:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10 15 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5 10 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 5 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have never create wkt polygons in 3D, but as
>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have seen in some websites, this could be done like this?
>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGON ((0 0 0, 0 1 5, 1 1 10, 1 0 5), (0 1 5,
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10, 1 1 10, 1 2 15), (1 0 5, 2 0 10, 1 1 10, 2 1 15), (1 1 10, 1 2 15,
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15, 2 2 20))
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> After this, I am not sure how to upload to DDBB
>>>>>>>>>>>>>>>>>>>>>>>>>>>> in shp because I have many files. Also, I don't know how to associate the
>>>>>>>>>>>>>>>>>>>>>>>>>>>> ortophoto to the shapes.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Being honest, I am a little bit lost and I
>>>>>>>>>>>>>>>>>>>>>>>>>>>> would appreciate if you can help me.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-02 7:38 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm sorry to hear that you still have those
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems. I'm looking into that and I will report back to you if I'm able
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to reproduce and solve it in some environment.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> At the moment you can't use .tiff file format.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Since XML3D, which we use as a rendering
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine, requires that rendered models consist of polygons we had to create
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygonal terrain from .asc point grid. In order to reduce processor loads
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> we decided that data should be stored as polygons. In that way data can be
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> returned to a client without any further processing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have developed proprietary importing tools
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support our business cases and therefore I can't provide those directly
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to you but I can describe what we did.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our workflow from .asc files included three
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> steps:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. Read asc file and create 2D array from it
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> where each cell is a point from asc file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. Inside a for loop select four points from
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> array and create wkt polygon from those points
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. Write just created polygon to a database or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to a shp file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> When polygons are stored in a database you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to publish that table in GeoServer as a layer and configure it to use
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS module.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that this clarifies needed steps from
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> source data to a production use.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 27, 2015 at 8:04 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue trying to find my problem but I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> haven't advance
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anyway, I don't write for that. I am trying
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to upload xyz format data and some ortophotos to display them with W3DS.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have the data in *.asc files and I have a
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> TIF file with all of them merged. As the documentation (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> says that the .shp, .dbf and .shx files
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are mandatory, I should convert all .asc
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to these formats? I cannot use* .tif*?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> As the documentation syas, I have to upload
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this files to the server and I suppose that the ortophotos also. However, I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> don't know how to display them afterwards.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you explain me? I am in a Fiware European
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> project and as you are the support of Fiware I hope you can help me.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Best regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:58 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have no glue why it's not loading since
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> personally I haven't ever used that module. You should read GeoServer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> startup logs and check if there are some fatal errors in service loading.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Logs should have something similar lines to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> these:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wfs', enabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wms', enabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wcs', enabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'w3ds', enabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Check errors near those.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> There is also GeoServer users mail list and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you probably could get more helpful response from there, since I'm not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expert in that area.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 1:13 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the comments.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> About the "Importer extension" I downloaded
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the core extension for version 2.6.0 as you said because I show that was
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the version when I install it. So, can you guess the reason of the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension for not working. As you explained, W3DS is an isolated module, so
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it has no sense for not working.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:08 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Changes delivered to FIWARE are isolated
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> only to W3DS module and those are written on top of the GeoServer version
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.6.0. Therefore you need to use extensions written for that specific
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version. We will move to next stable version 2.7 when it is released later
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this spring. Currently 2.7 release is in RC1 state.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our changes are also in the official
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer master and 2.7 branches and you could actually try to build
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either of those and see if build problem still exists. Meanwhile I try to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> replicate your problem in a virtual machine since everything worked well in
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> every physical machines I have access to.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 11:13 AM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue having a failure message in
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the same test.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have continued looking to the builded
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version (without tests as I said) and I was trying to use the "Importer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension" installed by copying some source from this link:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/latest/en/user/extensions/importer/installing.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I copied the files to the folder
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ".../geoserver/src/web/app/target/geoserver/WEB-INF/lib" as it says and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Geoserver, but the extension does not seems to load. Could be due
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to the Geoserver version done for fiware? Or, how could I solve the problem?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-23 11:55 GMT+00:00 Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Only difference between our work chains
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that I was able to find is that I use also clean statement in mvn build
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> command. Could you try that? If it's still not working I try to find some
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> time to reproduce problem in a clean machine.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mvn clean install -DdownloadSources=true
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -DskipTests=false -Pw3ds
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Resulting following summary:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Reactor Summary:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................................. SUCCESS [2.088s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core Platform Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [9.062s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Open Web Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [5.411s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Main Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................... SUCCESS [1:58.712s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Security Modules
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [0.043s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer JDBC Security Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [18.349s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer LDAP Security Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [35.825s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................... SUCCESS [1.450s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.0 Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [18.896s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.1 Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [19.249s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 2.0 Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [46.273s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Feature Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [1:21.581s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Map Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................ SUCCESS [1:27.636s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] KML support for GeoServer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [24.646s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoWebCache (GWC) Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .............................. SUCCESS [55.551s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Support Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [10.524s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Configuration Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ..................... SUCCESS [54.318s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Modules
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................. SUCCESS [0.028s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [46.005s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WMS UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [17.764s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GWC UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [23.123s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WFS UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [10.234s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Demoes Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [16.390s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WCS UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [12.849s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Modules
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [0.037s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Core Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [1:14.168s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI JDBC Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [50.839s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI LDAP Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [27.079s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [10.953s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Community Space
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................................... SUCCESS [0.027s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web 3D Service
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [4.663s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Application
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [3.207s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Extensions
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [0.083s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] BUILD SUCCESSFUL
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Total time: 14 minutes 49 seconds
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Finished at: Mon Feb 23 13:26:42
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> EET 2015
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Final Memory: 187M/1400M
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Feb 23, 2015 at 12:33 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed the installation guide of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Fiware for installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I used a Ubuntu 14.04 Server 64 bits
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 4 cores, 8GB RAM and 100GB of HD.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The version of JDK (openjdk-7-jdk)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is 7u51-2.4.6-1ubuntu4, and postgis 2.1.0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The source that I downloaded is the one
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you shared from git (git clone -b fiware
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver.git
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed all the commands so that's
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the reason from asking. I would appreciate if you can tell me what can be
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 13:03 GMT+00:00 Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> without knowledge about your build
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system (used java version, used operating system etc.) and where you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded sources I'm not able to help you with this problem. I just
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tested version which we have delivered to FIWARE (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and at least it build without any errors in any test cases.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, CatalogBuilder is bit out of my
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> knowledge scope.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 20, 2015 at 1:18 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, I forget to attach the log.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 11:17 GMT+00:00 Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi@gmail.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have one comment about the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation. Previously when I installed the geoserver I didn't notice
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because I was building without tests.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But I was building geoserver with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test where I found a failure on:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> testSingleBandedCoverage(org.geoserver.catalog.impl.CatalogBuilderTest)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I attached the log of the output for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your information.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> How can I solve this problem?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:48 GMT+00:00 Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the reply.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have a xyz format data also so I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will try to test what you sent me and look for the Unit Testing Plan link
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you sent.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If I have any doubt or problem I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will come back to you. Thank you.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:27 GMT+01:00 Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data publishing is well documented
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in GeoServer user manual:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/2.5.x/en/user/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data which we used in our
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> development was from National
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Land Survey of Finland. Source
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> data was in -xyz-format, which
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> contains elevation data with spatial information. With this source
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information it is possible to generate shapefile consisting polygon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> structure with elevation data. 2D presentation of the converted shapefile
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with elevation points is flat grid, in 3D presentation each grid points are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in same elevation level as in the real world. Therefore this grid with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elevation data can be used as source for terrain presentation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also read user guide from:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can find guide for setting up
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test setup from here:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- Forwarded message
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ----------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Wed, Feb 4, 2015 at 12:35 AM
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: W3DS - FIWARE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> miika.santala@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Miika,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I am Ibon from Spain.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I write to you because I am
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> involved in the FIWARE European project. This project promote a GIS data
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> provider with the W3DS for 3D visualization as the one you show on the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following link:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://130.206.81.238:8080/gis_test_client/index.xhtml
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I contact you because a have been
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in contact with Jorge Gustavo, who made a similar use of W3DS
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.sigte.udg.edu/jornadassiglibre2012/uploads/presentaciones_12/p43.pdf)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and he told me that W3DS is now supported by you.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the instructions
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of FIWARE wiki (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to start using the service and everything seems to work perfectly with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jetty.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I would like to know how
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have to store GIS data with 3D
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information straight to GeoServer. Is there any documentation of how to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> upload this kind of information? Can you share with me any documentation
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> about it?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Yours
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sincerely,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential
>>>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended
>>>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential
>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended
>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential and
>>>>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended
>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> –
>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> This e-mail and all attached material are confidential and
>>>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended
>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> –
>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This e-mail and all attached material are confidential and
>>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended
>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> –
>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>
>>>>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>>>>
>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>
>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>
>>>>>>>>>>>>> This e-mail and all attached material are confidential and may
>>>>>>>>>>>>> contain legally privileged information. If you are not the intended
>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> –
>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>> Software Engineer
>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>
>>>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>>>
>>>>>>>>>> See our new press release:
>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>
>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>
>>>>>>>>>> This e-mail and all attached material are confidential and may
>>>>>>>>>> contain legally privileged information. If you are not the intended
>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> –
>>>>>>>> Juha Hyvärinen
>>>>>>>> Software Engineer
>>>>>>>> Cyberlightning Ltd.
>>>>>>>>
>>>>>>>> email. juha.hyvarinen@cyberlightning.com
>>>>>>>>
>>>>>>>> See our new press release:
>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>
>>>>>>>> www.cyberlightning.com
>>>>>>>>
>>>>>>>> This e-mail and all attached material are confidential and may
>>>>>>>> contain legally privileged information. If you are not the intended
>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> –
>>>>>>> Sami Jylkkä
>>>>>>> Cyberlightning Ltd.
>>>>>>>
>>>>>>> www.cyberlightning.com
>>>>>>>
>>>>>>> Skype: sami_jylkka
>>>>>>>
>>>>>>> This e-mail and all attached material are confidential and may
>>>>>>> contain legally privileged information. If you are not the intended
>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> –
>>>>> Sami Jylkkä
>>>>> Cyberlightning Ltd.
>>>>>
>>>>> www.cyberlightning.com
>>>>>
>>>>> Skype: sami_jylkka
>>>>>
>>>>> This e-mail and all attached material are confidential and may contain
>>>>> legally privileged information. If you are not the intended recipient,
>>>>> please contact the sender and delete the e-mail from your system without
>>>>> producing, distributing or retaining copies thereof.
>>>>>
>>>>
>>>>
>>>
>>>
>>> –
>>> Sami Jylkkä
>>> Cyberlightning Ltd.
>>>
>>> www.cyberlightning.com
>>>
>>> Skype: sami_jylkka
>>>
>>> This e-mail and all attached material are confidential and may contain
>>> legally privileged information. If you are not the intended recipient,
>>> please contact the sender and delete the e-mail from your system without
>>> producing, distributing or retaining copies thereof.
>>>
>>
>>
>
>
> –
> Sami Jylkkä
> Cyberlightning Ltd.
>
> www.cyberlightning.com
>
> Skype: sami_jylkka
>
> This e-mail and all attached material are confidential and may contain
> legally privileged information. If you are not the intended recipient,
> please contact the sender and delete the e-mail from your system without
> producing, distributing or retaining copies thereof.
>

_______________________________________________
Fiware-finodex-coaching mailing list
Fiware-finodex-coaching@lists.fi-ware.org
https://lists.fi-ware.org/listinfo/fiware-finodex-coaching

[Created via e-mail received from: Ibon Salbidegoitia <ibon.salbi@gmail.com>]

Options
- Sort By Name
- Sort By Date
- Ascending
- Descending
- Download All

Attachments

suzanne.json

18/Aug/15 3:29 PM

41 kB

FW External User

Fiware_W3DS.png

1.37 MB

11/Aug/15 6:38 PM
GIS_Client-texturesNotProperlyAlligned.png

536 kB

05/Nov/15 9:55 AM
GIS_Client-texturesNotProperlyAlligned.png

536 kB

29/Oct/15 9:19 AM
GIS_Client-texturesNotProperlyAlligned.png

536 kB

28/Oct/15 8:22 AM
GIS_Client-texturesNotProperlyAlligned.png

536 kB

26/Oct/15 9:08 AM
GIS_Client-texturesNotProperlyAlligned.png

536 kB

20/Oct/15 7:29 PM
Img1.png

519 kB

07/Aug/15 5:43 PM
Img2.png

526 kB

07/Aug/15 5:43 PM
Img3.png

489 kB

07/Aug/15 5:43 PM
layerborders.png

1.23 MB

05/Nov/15 9:55 AM
layerborders2.png

2.11 MB

05/Nov/15 9:55 AM
XML3D_test1.png

1.45 MB

28/Aug/15 5:05 PM

Activity

Ascending order - Click to sort in descending order

FW External User created issue - 06/Jul/15 9:23 AM

Pasquale Vitale made changes - 08/Jul/15 4:14 PM

Field	Original Value	New Value
Assignee		Pasquale Vitale [ pasquale.vitale ]

Pasquale Vitale made changes - 08/Jul/15 4:30 PM

Assignee

Pasquale Vitale [ pasquale.vitale ]

Pasquale Vitale made changes - 08/Jul/15 4:32 PM

Assignee

Pasquale Vitale [ pasquale.vitale ]

Pasquale Vitale made changes - 08/Jul/15 4:32 PM

Status

Open [ 1 ]

In Progress [ 3 ]

Pasquale Vitale made changes - 08/Jul/15 4:33 PM

Status

In Progress [ 3 ]

Answered [ 10104 ]

Pasquale Vitale made changes - 08/Jul/15 4:33 PM

Resolution		Done [ 10000 ]
Status	Answered [ 10104 ]	Closed [ 6 ]

FW External User made changes - 07/Aug/15 5:43 PM

Attachment		Img1.png [ 17548 ]
Attachment		Img2.png [ 17549 ]
Attachment		Img3.png [ 17550 ]

FW External User made changes - 11/Aug/15 6:38 PM

Attachment

Fiware_W3DS.png [ 17565 ]

FW External User made changes - 18/Aug/15 3:29 PM

Attachment

suzanne.json [ 17628 ]

FW External User made changes - 28/Aug/15 5:05 PM

Attachment

XML3D_test1.png [ 17746 ]

Manuel Escriche made changes - 30/Sep/15 1:04 PM

Component/s

FINODEX [ 10364 ]

Backlog Manager made changes - 30/Sep/15 6:41 PM

Summary

Re: [Fiware-finodex-coaching] W3DS - FIWARE

FIWARE.Request.Coach.FINODEX.Re: W3DS - FIWARE

FW External User made changes - 20/Oct/15 7:29 PM

Attachment

GIS_Client-texturesNotProperlyAlligned.png [ 18568 ]

FW External User made changes - 26/Oct/15 9:08 AM

Attachment

GIS_Client-texturesNotProperlyAlligned.png [ 18601 ]

FW External User made changes - 28/Oct/15 8:22 AM

Attachment

GIS_Client-texturesNotProperlyAlligned.png [ 18650 ]

FW External User made changes - 29/Oct/15 9:19 AM

Attachment

GIS_Client-texturesNotProperlyAlligned.png [ 18668 ]

FW External User made changes - 05/Nov/15 9:55 AM

Attachment		GIS_Client-texturesNotProperlyAlligned.png [ 18745 ]
Attachment		layerborders.png [ 18746 ]
Attachment		layerborders2.png [ 18747 ]

People

Assignee:

Pasquale Vitale

Reporter:

FW External User

Votes:

0 Vote for this issue

Watchers:

2 Start watching this issue

Dates

Created:

06/Jul/15 9:23 AM

Updated:

05/Nov/15 9:55 AM

Resolved:

08/Jul/15 4:33 PM

Agile

View on Board